Every 2024 Kenworth T880 recall
Each campaign as NHTSA published it: what is wrong, what can happen, and the fix. Newest first.
Electrical System · NHTSA 25V569000
Sep 2, 2025Electrical System: Instrument Cluster/Panel
- Problem
- PACCAR Incorporated (PACCAR) is recalling certain 2024-2026 Kenworth T680, T880, and W990 trucks. The 15-inch digital display may fail to display warning lights or vehicle speed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 101, "Controls and Displays" and 121, "Air Brake Systems."
- Risk
- An instrument panel display that does not show critical information, such as warning lights or vehicle speed, increases the risk of a crash.
- Fix
- Dealers will update the vehicle display software, free of charge. Owner letters were mailed October 27, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888. PACCAR's number for this recall is 25PACG.
Full recall details for 25V569000 →Exterior Lighting · NHTSA 25V436000
Jun 26, 2025Exterior Lighting:Lighting Control Module:Software
- Problem
- PACCAR Incorporated (PACCAR) is recalling certain 2024-2026 Kenworth T480, T680, T880, W990, Peterbilt 520, 536, 537, 548, 567, 579, 589, 2025 Kenworth T180, Peterbilt 535, 2025-2026 Kenworth T280, T380 and L770 vehicles. The tail brake light, upper and lower beam headlights, reverse light, and turn signal may not illuminate as intended. In addition, the lift axles, if lowered, may revert to a raised position, or oscillate up and down when the signal warning lights are activated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices and Associated Equipment."
- Risk
- Delayed and unsteady headlights can result in insufficient illumination of the road, decreasing the driver's visibility and increasing the risk of a crash. In addition, an unexpected position change of the lift axles may increase the risk of injury.
- Fix
- Dealers will update the VCU software, free of charge. Owner letters were mailed August 19, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's number for this recall is 25PACF.
Full recall details for 25V436000 →Service Brakes, Hydraulic · NHTSA 24V915000
Dec 10, 2024Service Brakes, Hydraulic:Antilock/Traction Control/Electronic Limited Slip:Control Unit/Module
- Problem
- PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning.
- Risk
- Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may not function properly or at all, increasing the risk of a crash.
- Fix
- Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed February 3, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWL and 24PBL.
Full recall details for 24V915000 →Steering · NHTSA 24V908000
Dec 3, 2024Steering:Linkages:Knuckle:Spindle:Arm
- Problem
- PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 389, 548, Kenworth T480, T800, 2024-2025 Peterbilt 520, 567 and Kenworth T880 vehicles with PACCAR 20k steer axles. The steering arm and/or tie rod bracket fasteners may fail, resulting in a loss of steering control.
- Risk
- A loss of steering control increases the risk of a crash.
- Fix
- Dealers will install new correctly torqued fasteners, free of charge. Owner notification letters were mailed January 21, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 or Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWK and 24PBK.
Full recall details for 24V908000 →Power Train · NHTSA 24V190000
Mar 20, 2024Power Train:Automatic Transmission:Lever and Linkage:Column Shift
- Problem
- PACCAR Incorporated (PACCAR) is recalling certain 2021-2024 Peterbilt 365, 367, 389, 535, 536, 537, 548, 567, 579, and 2021-2025 Kenworth T180, T280, T380, T480, T680, T880 and W990 trucks. The right-hand gear shifter stalk connectors may have been improperly crimped, resulting in a loss of communication.
- Risk
- A loss of communication between the gear shifter and the transmission may result in the vehicle becoming disabled after coming to a stop, increasing the risk of a crash.
- Fix
- Dealers will inspect and replace the gear shifter assembly as necessary, free of charge. Owner letters were mailed December 15, 2025, then phased after that. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24PBE and 24KWE.
Full recall details for 24V190000 →Steering · NHTSA 24V044000
Jan 25, 2024Steering
- Problem
- PACCAR Incorporated (PACCAR) is recalling certain 2024-2025 Kenworth T280, T380, T480, T680, T880, L770, W990, and 2024-2025 Peterbilt 389, 520, 535, 536, 537, 548, 567, 579, 589 trucks. The steering gear assemblies may have been assembled incorrectly with fewer recirculating balls than are required, which may result in a loss of steering control.
- Risk
- A loss of steering control increases the risk of a crash.
- Fix
- Dealers will inspect and replace the steering gears as necessary, free of charge. Owner notification letters were mailed March 20, 2024. Owners may contact Peterbilt customer service at 1-940-591-4220 and/or Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 24PBC and 24KWC.
Full recall details for 24V044000 →Steering · NHTSA 24V043000
Jan 25, 2024Steering:Linkages:Knuckle:Spindle:Arm
- Problem
- PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 389, 520, 567, and Kenworth T800, T880, W900, and W990 trucks. The bearing journals may not be fully seated in the steering knuckle assemblies, preventing the proper installation of the wheel end hub assemblies.
- Risk
- An improperly installed wheel end hub assembly can leak oil, causing the axle spindles to loosen or fracture and increasing the risk of a crash.
- Fix
- Dealers will inspect and replace the steering knuckle assemblies as necessary, free of charge. Owner letters were mailed February 23, 2024. Owners may contact Peterbilt customer service at 1-940-591-4220 and/or Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 24PBB and 24KWB.
Full recall details for 24V043000 →
2024 Kenworth T880 complaints and service bulletins
Owners filed 1 complaints with NHTSA about the 2024 Kenworth T880. Kenworth has issued at least 64 technical service bulletins (repair instructions to dealers) for this model year. Complaints are unverified owner reports; a recall is the manufacturer’s admission of a safety defect.
Most-reported components
Service bulletins by component
- Engine (30)
- Electrical System (17)
- Unknown Or Other (7)
- Power Train (6)
- Steering (4)
- Exterior Lighting (2)
Read Kenworth T880 owner complaints and bulletins, every year
What people reported
Owners have filed 1 complaints with NHTSA about the 2024 Kenworth T880. A few in their own words, shortened. Complaints are unverified and are not proof of a defect or of any recall.
“Injector system keeps truck constantly wanting to do a regen. Too much fuel is being pushed into the particulate filter.”
2024 KENWORTH T880Jul 19, 2025
Complaint filed with NHTSA, not verified by the agency · NHTSA complaint 11674741
Check your T880 by VIN
Not every 2024 Kenworth T880 is in every recall. Enter your 17-character VIN to see the recalls on record for your exact vehicle, then confirm which are still open at NHTSA.gov or with any Kenworth dealer.
Run a free VIN recall check →