Skip to content
Use caution Vehicle recall · NHTSA · Published August 9, 2017

Gillig 2013-2016 Low Floor Buses: Steering Power Loss Risk

Gillig recalls certain 2013-2016 Hybrid and Electric Low Floor buses due to potential loss of power steering assist, increasing crash risk. Owners must have steering motor-pump assemblies replaced free by dealers.

🇺🇸 NHTSA recall #17V559000VehicleGillig ›
✎ GovInfoNow plain-language explainer

What happened, in plain English

Gillig is recalling 2013-2016 Hybrid and Electric Low Floor buses because a steering component failure could cause loss of power steering, increasing crash risk. Owners need to have the steering motor-pump assembly replaced by a dealer. Read more at govinfonow.com/recall/1226992-gillig-2013-2016-low-floor-buses-steering-power-loss-risk.

Source Summary by GovInfoNow · govinfonow.com/recall/1226992-gillig-2013-2016-low-floor-buses-steering-power-loss-risk · Updated October 7, 2026 · Official notice: NHTSA #17V559000

Cite this page

“Gillig 2013-2016 Low Floor Buses: Steering Power Loss Risk.” GovInfoNow, updated October 7, 2026. https://govinfonow.com/recall/1226992-gillig-2013-2016-low-floor-buses-steering-power-loss-risk. Based on NHTSA recall #17V559000 (https://www.nhtsa.gov/recalls?nhtsaId=17V559000).

Why it’s dangerous

The coupler between the high-voltage electric motor and hydraulic steering pump shafts may fail, causing a loss of power steering assist. This requires more steering effort, which could lead to a crash if the driver is unable to maintain control.

Who’s affected

Bus owners who purchased Gillig 2013-2016 Hybrid or Electric Low Floor buses are affected. Drivers and passengers on these buses face the highest risk due to potential loss of steering assistance.

How to tell if you have this one

Check if your bus is a Gillig 2013-2016 Hybrid or Electric Low Floor model. The recall covers all buses with electro-hydraulic power steering assist.

  • Brand
    Gillig
  • Category
    Vehicle
Based on the official NHTSA remedy

What to do — step by step

  1. Contact Gillig Customer Service

    Call 1-800-735-1500 to schedule a replacement of the steering motor-pump assembly.

  2. Have Steering Assembly Replaced

    Dealers will replace the steering motor-pump assembly at no cost to the owner.

Official remedy

What NHTSA says to do

Gillig will notify owners, and dealers will replace the steering motor-pump assemblies, free of charge. The recall began on October 24, 2017. Owners may contact Gillig customer service at 1-800-735-1500.

How this recall unfolded

Recall timeline

2 dated steps over 2 months.

1. NHTSA received the defect report: Aug 9, 201712. Recall began: Oct 24, 201722017
  1. NHTSA received the defect report
  2. Recall began

Dates from the agency record only; steps without a date are left out.

Keep exploring

Where this comes from

The facts (hazard, remedy, dates, manufacturer) are pulled from the official NHTSA recall record. The plain-language summary and step-by-step checklist are written by GovInfoNow to make the official notice easier to act on — they don’t replace it.

  • Official source: NHTSA Recall #17V559000 (August 9, 2017)
  • Plain-language summary written by qwen3:4b on October 7, 2026, from the official record above. Not reviewed by a person — if it conflicts with the NHTSA notice, the notice is correct. Report an error on this page.
  • GovInfoNow is an independent service and is not a government agency. We republish official NHTSA recall data; we don’t issue, amend or administer recalls.
GovInfoNow is an independent guide. We are not NHTSA or any government agency. Always confirm details with the official recall.Data: CPSC · FDA · NHTSA · USDA