Skip to content
Vehicle safety recalls · NHTSA

2026 Altec AN Series Aerial Device recalls (3)

3 NHTSA safety recalls cover the 2026 Altec AN Series Aerial Device. Every recall repair is free at any Altec dealer.

3recalls
0owner complaints
0service bulletins
0do-not-drive / park-outside

Is yours affected? Recalls cover ranges of VINs, not every 2026 Altec AN Series Aerial Device. Check your AN Series Aerial Device by VIN and confirm open recalls at NHTSA.gov.

Every 2026 Altec AN Series Aerial Device recall

Each campaign as NHTSA published it: what is wrong, what can happen, and the fix. Newest first.

  • Equipment · NHTSA 26V752000

    Nov 13, 2026Equipment:Mechanical:Containment:Valve
    Problem
    Altec Industries, Inc. (Altec) is recalling certain 2025-2026 AM Series Aerial Device, and AN Series Aerial Device vehicles. The activation handle for the platform stow valve at the lower controls may have been assembled without thread locking compound, and can loosen and separate from the control valve.
    Risk
    A separated activation handle can allow the control valve to eject hot oil, increasing the risk of injury.
    Fix
    Altec will instruct owners to inspect the platform rotate valve for an affected lot number. If the valve is from the affected lot, owners can order a kit and replace the affected valve or schedule service with Altec, free of charge. Owner notification letters are expected to be mailed January 8, 2027. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3385.
    Full recall details for 26V752000 →
  • Equipment · NHTSA 26V738000

    Nov 6, 2026Equipment:Mechanical:Boom/Crane/Ladder:Critical Fasteners
    Problem
    Altec Industries, Inc. (Altec) is recalling certain 2025-2026 AN Series, AA Series, and AM Series Aerial Device vehicles. The retention hardware for the rear mounting pin on the jib tilt cylinder may be improperly tightened.
    Risk
    Loose hardware can fall out and release the cylinder pin, causing the jib to swing freely and the winch line to drop up to 10 feet, which increases the risk of injury.
    Fix
    Altec will provide instructions on how to inspect and properly tighten the retention hardware, free of charge. Owner notification letters are expected to be mailed January 4, 2027. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3381.
    Full recall details for 26V738000 →
  • Structure · NHTSA 26V637000

    Oct 2, 2026Structure:Body:Step/Ladder
    Problem
    Altec Industries, Inc. (Altec) is recalling certain 2020-2026 AA Series Aerial Device, 2021-2026 AN Series Aerial Device, 2023-2026 AM Series Aerial Device, and 2024-2026 Digger Derrick, and 2024-2025 A-Class vehicles. The turntable mounted platform access step may have been improperly welded between the step tube and mounting plate, and allow the step to separate from the vehicle.
    Risk
    A step that separates or becomes unstable while in use, increases the risk of a fall or injury.
    Fix
    Altec will replace the steps, free of charge. Owner notification letters are expected to be mailed November 27, 2026. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3374.
    Full recall details for 26V637000 →

Check your AN Series Aerial Device by VIN

Not every 2026 Altec AN Series Aerial Device is in every recall. Enter your 17-character VIN to see the recalls on record for your exact vehicle, then confirm which are still open at NHTSA.gov or with any Altec dealer.

Run a free VIN recall check →