Skip to content
Stop using now Vehicle recall · NHTSA · Published November 6, 2026

Altec AA Series Recall: Loose Hardware Risks Jib Drop

Altec recalls certain 2025-2026 AA Series aerial devices due to loose retention hardware that may cause the jib to swing and winch line to drop.

🇺🇸 NHTSA recall #26V738000VehicleAltec ›
✎ GovInfoNow plain-language explainer

Altec Industries is recalling certain 2025-2026 AN, AA, and AM Series Aerial Devices because the retention hardware for the rear mounting pin on the jib tilt cylinder may be improperly tightened. This defect allows loose hardware to fall out, which can release the cylinder pin and cause the jib to swing freely while dropping the winch line up to 10 feet. Altec will provide free instructions to inspect and tighten this hardware. Read more at govinfonow.com/recall/2281967-altec-aa-series-aerial-device-2025-recall-equipment.

Source Summary by GovInfoNow · govinfonow.com/recall/2281967-altec-aa-series-aerial-device-2025-recall-equipment · Published November 18, 2026 · Updated November 18, 2026 · Official notice: NHTSA #26V738000

Cite this page

“Altec AA Series Recall: Loose Hardware Risks Jib Drop.” GovInfoNow, updated November 18, 2026. https://govinfonow.com/recall/2281967-altec-aa-series-aerial-device-2025-recall-equipment. Based on NHTSA recall #26V738000 (https://www.nhtsa.gov/recalls?nhtsaId=26V738000).

Altec Industries recalled 2025-2026 AA, AM, and AN Series Aerial Devices due to loose retention hardware on the jib tilt cylinder, according to the National Highway Traffic Safety Administration (NHTSA) on Nov. 6, 2026. Owners should inspect and tighten the hardware as instructed by Altec.

How to tell if you have it

  • Altec AA Series Aerial Device, 2025-2026
  • Altec AM Series Aerial Device, 2025-2026
  • Altec AN Series Aerial Device, 2025-2026

What to do

Altec will provide instructions on how to inspect and properly tighten the retention hardware, free of charge. Owner notification letters are expected to be mailed January 4, 2027. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3381.

The hazard

Loose hardware can fall out and release the cylinder pin, causing the jib to swing freely and the winch line to drop up to 10 feet, which increases the risk of injury. The record does not report specific incidents or injuries for this recall.

Context

GovInfoNow's records show Altec Industries, Inc. has 35 other recalls on record since March 30, 2020. Other recent recalls include the Oct. 9, 2026 Altec AC Series Crane Recall for a missing rearview camera hazard and the Sept. 24, 2026 Altec 2021-2025 Digger Derrick Electrical Recall for crash risk when the boom is elevated. Other recent recalls of similar products include the July 9, 2026 Peterbilt 579 Recall for an air brake valve defect and the July 22, 2026 ATC Recalls 2026 RM500/RM700 Trailers for a winch hazard.

How to tell if you have this one

Check if you own a 2025-2026 AN Series, AA Series, or AM Series Aerial Device. The issue specifically involves the retention hardware for the rear mounting pin on the jib tilt cylinder. Owner notification letters are expected to be mailed starting January 4, 2027.

  • Brand
    Altec
  • Category
    Vehicle
Based on the official NHTSA remedy

What to do — step by step

  1. Contact Altec Customer Service

    Call 1-877-462-5832 or reference recall number CSN-3381 to receive free instructions for inspecting and tightening the retention hardware.

Official remedy

What NHTSA says to do

Altec will provide instructions on how to inspect and properly tighten the retention hardware, free of charge. Owner notification letters are expected to be mailed January 4, 2027. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3381.

How this recall unfolded

Recall timeline

GovInfoNow listed this recall 12 days after the agency date.

1. NHTSA received the defect report: Nov 6, 202612. Added to GovInfoNow: Nov 18, 202623. Owner letters expected: Jan 4, 2027 (expected)320262027
  1. NHTSA received the defect report
  2. Added to GovInfoNow
  3. Owner letters expected (expected, per the notice)

Dates from the agency record only; steps without a date are left out.

Keep exploring

Where this comes from

The facts (hazard, remedy, dates, manufacturer) are pulled from the official NHTSA recall record. The plain-language summary and step-by-step checklist are written by GovInfoNow to make the official notice easier to act on — they don’t replace it.

  • Official source: NHTSA Recall #26V738000 (November 6, 2026)
  • Plain-language summary written by qwen3.6:35b-a3b on November 18, 2026, from the official record above. Not reviewed by a person — if it conflicts with the NHTSA notice, the notice is correct. Report an error on this page.
  • GovInfoNow is an independent service and is not a government agency. We republish official NHTSA recall data; we don’t issue, amend or administer recalls.
GovInfoNow is an independent guide. We are not NHTSA or any government agency. Always confirm details with the official recall.Data: CPSC · FDA · NHTSA · USDA