Skip to content
Stop using now Vehicle recall · NHTSA · Published June 11, 2026

Altec AC Series Crane Recall: Missing Welds on IJ26 Jib

Altec recalls 2024-2026 AC Series Cranes due to missing welds on the IJ26 jib that can cause platform failure. Check your equipment now.

🇺🇸 NHTSA recall #26V384000VehicleAltec ›
✎ GovInfoNow plain-language explainer

Altec Industries is recalling certain 2024 through 2026 AC Series Crane vehicles because the inside joints between the side plates and base plates of the 26-foot insulating personnel jib (IJ26) may have missing welds. These missing welds can lead to platform joint failure from fatigue or overload, which increases the risk of the platform falling from the boom tip. Altec will inspect the jib and add missing welds or provide a repair kit free of charge. Read more at govinfonow.com/recall/1364197-altec-ac-series-crane-recall-missing-welds-on-ij26-jib.

Source Summary by GovInfoNow · govinfonow.com/recall/1364197-altec-ac-series-crane-recall-missing-welds-on-ij26-jib · Updated October 9, 2026 · Official notice: NHTSA #26V384000

Cite this page

“Altec AC Series Crane Recall: Missing Welds on IJ26 Jib.” GovInfoNow, updated October 9, 2026. https://govinfonow.com/recall/1364197-altec-ac-series-crane-recall-missing-welds-on-ij26-jib. Based on NHTSA recall #26V384000 (https://www.nhtsa.gov/recalls?nhtsaId=26V384000).

Altec Industries is recalling certain 2024-2026 AC Series Crane vehicles due to missing welds that can cause platform joint failure and increase the risk of injury, according to the National Highway Traffic Safety Administration. The recall was announced on June 11, 2026.

How to tell if you have it

  • Altec AC Series Crane, 2024-2026

What to do

Owners should inspect the IJ26 jib for missing welds and take it out of service immediately if found. Altec will add the missing welds or provide a repair procedure and kit free of charge. Owners may contact Altec customer service at 1-877-462-5832.

The hazard

Missing welds in the inside joints between the side plates and base plates of the 26-foot insulating personnel jib can lead to platform joint failure due to fatigue or overload. This failure may result in the platform falling from the boom tip, increasing the risk of injury.

Context

GovInfoNow's records show Altec Industries has issued 33 other recalls since March 30, 2020. Recent similar recalls include an Altec AM Series Aerial Device recall on October 2, 2026, and an Altec 2021-2025 Digger Derrick Electrical Recall on September 24, 2026. Other recent recalls of similar products include a Jeep Wagoneer S (2024-2026) recall on March 12, 2026.

How to tell if you have this one

Check if you own an Altec AC Series Crane manufactured between 2024 and 2026. Specifically, look for the 26-foot insulating personnel jib (IJ26). Owner notification letters were mailed on July 23, 2026.

  • Brand
    Altec
  • Category
    Vehicle
Based on the official NHTSA remedy

What to do — step by step

  1. Inspect The Jib

    Altec advises owners to inspect the IJ26 jib for missing welds in the inside joints between the side plates and base plates.

  2. Take Out Of Service

    If the welds are missing, you must take the jib out of service immediately to prevent potential platform failure.

  3. Contact Altec For Repair

    Altec will add the missing welds or provide a repair procedure and kit free of charge. Contact customer service at 1-877-462-5832 using recall number MAB-3330.

Official remedy

What NHTSA says to do

Altec will advise owners to inspect the IJ26 jib for missing welds. If the welds are missing, the jib should be taken out of service immediately. Altec will add the missing welds or provide a repair procedure and kit, free of charge. Owner notification letters were mailed July 23, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is MAB-3330.

How this recall unfolded

Recall timeline

Owners were mailed letters 42 days after NHTSA received the defect report.

1. NHTSA received the defect report: Jun 11, 202612. Owner letters mailed: Jul 23, 202623. Added to GovInfoNow: Oct 9, 202632026
  1. NHTSA received the defect report
  2. Owner letters mailed
  3. Added to GovInfoNow

Dates from the agency record only; steps without a date are left out.

Keep exploring

Where this comes from

The facts (hazard, remedy, dates, manufacturer) are pulled from the official NHTSA recall record. The plain-language summary and step-by-step checklist are written by GovInfoNow to make the official notice easier to act on — they don’t replace it.

  • Official source: NHTSA Recall #26V384000 (June 11, 2026)
  • Plain-language summary written by qwen3.6:35b-a3b on October 9, 2026, from the official record above. Not reviewed by a person — if it conflicts with the NHTSA notice, the notice is correct. Report an error on this page.
  • GovInfoNow is an independent service and is not a government agency. We republish official NHTSA recall data; we don’t issue, amend or administer recalls.
GovInfoNow is an independent guide. We are not NHTSA or any government agency. Always confirm details with the official recall.Data: CPSC · FDA · NHTSA · USDA