Skip to content
Use caution Vehicle recall · NHTSA · Published January 17, 2019

Jaguar 2019 F-Type Recall: Engine Failure Risk

Jaguar recalls 2019 F-Type vehicles with V6/V8 engines due to crankshaft pulley bolt fracture risk causing engine failure. Owners must contact dealers for free replacement.

🇺🇸 NHTSA recall #19V039000VehicleJaguar ›
✎ GovInfoNow plain-language explainer

What happened, in plain English

Jaguar is recalling 2019 F-Type vehicles with V6 or V8 engines because a crankshaft pulley retaining bolt might fracture, leading to engine failure. This could increase crash risk if the engine fails while driving. Read more at govinfonow.com/recall/1224039-jaguar-2019-f-type-recall-engine-failure-risk.

Source Summary by GovInfoNow · govinfonow.com/recall/1224039-jaguar-2019-f-type-recall-engine-failure-risk · Updated October 5, 2026 · Official notice: NHTSA #19V039000

Cite this page

“Jaguar 2019 F-Type Recall: Engine Failure Risk.” GovInfoNow, updated October 5, 2026. https://govinfonow.com/recall/1224039-jaguar-2019-f-type-recall-engine-failure-risk. Based on NHTSA recall #19V039000 (https://www.nhtsa.gov/recalls?nhtsaId=19V039000).

Why it’s dangerous

A crankshaft pulley retaining bolt may fracture due to improper manufacturing. This can cause engine failure while driving, increasing crash risk.

Who’s affected

Owners of 2019 Jaguar F-Type vehicles with V6 or V8 gasoline engines are affected. Drivers using these vehicles are most at risk if the engine fails while moving.

How to tell if you have this one

Check if your 2019 Jaguar F-Type has a V6 or V8 gasoline engine. The recall began February 11, 2019, and affects vehicles sold in the U.S. from that date.

  • Brand
    Jaguar
  • Category
    Vehicle
Based on the official NHTSA remedy

What to do — step by step

  1. Contact Jaguar Customer Service

    Call 1-800-452-4827 to schedule a free replacement of the crankshaft pulley center retaining bolt.

Official remedy

What NHTSA says to do

Jaguar has notified owners, and dealers will replace the crankshaft pulley center retaining bolt, free of charge. The recall began February 11, 2019. Owners may contact Jaguar customer service at 1-800-452-4827. Jaguar's number for this recall is H181.

How this recall unfolded

Recall timeline

2 dated steps over 25 days.

1. NHTSA received the defect report: Jan 17, 201912. Recall began: Feb 11, 201922019
  1. NHTSA received the defect report
  2. Recall began

Dates from the agency record only; steps without a date are left out.

Keep exploring

Where this comes from

The facts (hazard, remedy, dates, manufacturer) are pulled from the official NHTSA recall record. The plain-language summary and step-by-step checklist are written by GovInfoNow to make the official notice easier to act on — they don’t replace it.

  • Official source: NHTSA Recall #19V039000 (January 17, 2019)
  • Plain-language summary written by qwen3:4b on October 5, 2026, from the official record above. Not reviewed by a person — if it conflicts with the NHTSA notice, the notice is correct. Report an error on this page.
  • GovInfoNow is an independent service and is not a government agency. We republish official NHTSA recall data; we don’t issue, amend or administer recalls.
GovInfoNow is an independent guide. We are not NHTSA or any government agency. Always confirm details with the official recall.Data: CPSC · FDA · NHTSA · USDA