What was recalled
The U.S. Consumer Product Safety Commission has issued an urgent recall concerning specific pool drain covers manufactured and sold under the brand name Broqixin. This action targets a distinct subset of products designed to cover the main drains in swimming pools and spas, which are critical components for water circulation but also potential entry points for suction entrapment if not properly engineered. The recalled items are white plastic drain covers that measure approximately 7.36 inches in diameter and weigh about 3.84 ounces. Each unit is packaged with two screws intended for installation. The specific model number printed on the product’s packaging is "Model 11064W." These physical characteristics serve as the primary identifiers for consumers attempting to verify whether their current pool equipment falls under this safety alert.
The scope of this recall is defined by both the manufacturer and the point of sale. The affected products were sold on Amazon by a seller identified as Broqixin. While the exact number of units involved in this recall is not specified in the current public record, the seriousness of the hazard necessitates that any consumer who purchased these covers through this channel should treat them as part of the affected batch until verified otherwise. The recall was officially announced on June 4, 2026, bringing immediate attention to the safety deficiencies found in these specific drain covers.
The core issue driving this recall is not merely a manufacturing defect but a fundamental failure to meet federal safety standards. Specifically, the recalled Broqixin pool drain covers violate the entrapment protection standards established by the Virginia Graeme Baker Pool and Spa Safety Act (VGBA). This federal law was enacted to prevent tragic incidents where swimmers become stuck to pool drains due to powerful suction. By failing to comply with these rigorous entrapment protection standards, the recalled covers pose a severe risk of serious injury or death from entrapment and drowning hazards. It is important for consumers to understand that this violation is not a minor oversight; it represents a critical gap in safety engineering that leaves swimmers vulnerable to powerful suction forces that can hold them underwater or pin them against the drain opening.
If you have installed these white plastic covers, marked with model number 11064W, in your pool or spa, they are considered unsafe for use. The recall emphasizes that these products do not provide the necessary protection required by law to keep swimmers safe from suction entrapment. Therefore, identification of the product through its visual and physical attributes—white color, plastic construction, specific dimensions, weight, and model number—is the first step in ensuring your safety. Do not assume that a drain cover is safe simply because it fits the pool; compliance with the VGBA is the only reliable indicator of safety in this context.
The hazard, explained
To understand why this recall is so urgent, we need to look at the physics of how pool drains work and what happens when they are not properly protected. Modern pools and spas rely on suction to circulate water through filters and back into the basin. This suction creates a powerful vacuum effect at the drain opening. Under normal circumstances, this force is carefully calculated and balanced to ensure safe water flow without pulling swimmers in. However, this Broqixin product fails to meet the entrapment protection standards required by the Virginia Graeme Baker Pool & Spa Safety Act (VGBA). When a drain cover violates these federal safety standards, it lacks the necessary design features—such as specific hole sizes, patterns, or structural integrity—that are intended to break up suction and prevent a body part from being held firmly against the opening.
The primary danger here is "suction entrapment," which occurs when a swimmer’s body, hair, or swimsuit comes into contact with an uncovered or improperly covered drain. If a person becomes immobilized over the drain due to their weight or clothing getting caught, the continuous suction can hold them in place with tremendous force. This is not merely a matter of being stuck; it is a life-threatening scenario where the individual may be unable to break free even if they are strong enough to swim elsewhere in the pool. The water flow creates a seal that acts like a powerful magnet, pinning the person against the drain plate.
Beyond simple entrapment, there is a severe risk of "entrapment drowning." If a swimmer is held underwater by the suction, they cannot surface to breathe. Even if they are not fully submerged initially, the struggle to free themselves can lead to exhaustion or panic, increasing the likelihood of inhalation of water. In worst-case scenarios, this results in drowning. Additionally, there is the risk of "evisceration" or severe tissue trauma, where the suction pulls skin and soft tissue into the drain pipe, causing catastrophic injury. These hazards are particularly insidious because they can happen quickly and without warning, especially to children who may not understand the danger or have the strength to resist the pull.
The VGBA was enacted specifically to prevent these tragedies by mandating that all public and residential pools use drain covers that meet rigorous safety standards. These standards ensure that drains are designed to minimize suction forces and prevent body parts from being trapped. The Broqixin drain covers, however, do not comply with these requirements. This means they do not provide the critical barrier that stops a swimmer from becoming entrapped. The absence of this protection turns a routine swimming activity into a potential death trap, highlighting why immediate removal and stopping use are essential steps for anyone who owns or operates a pool with these covers.
Who is most at risk
While any swimmer in a pool or spa equipped with the recalled Broqixin drain covers faces a serious threat, the danger is not distributed equally. The primary group at immediate risk includes everyone who currently uses a pool or hot tub where these specific white plastic covers are installed. Because the recall stems from a violation of the Virginia Graeme Baker Pool and Spa Safety Act (VGBA), the fundamental issue is that the cover fails to provide adequate entrapment protection. This means that if a swimmer’s body part, hair, or swimsuit gets caught in the drain, the suction force is not properly dispersed or blocked. Consequently, any individual who has purchased these covers from Amazon under the Broqixin brand and installed them in their private residence or business should be considered at risk until they are removed.
Among all swimmers, children are disproportionately vulnerable to the mechanics of drain entrapment. Young bodies are smaller, lighter, and less powerful than those of adults, making them more susceptible to being held underwater by suction forces that an adult might be able to fight against. A child’s head is also proportionally larger relative to their body weight, which can cause them to sink more quickly once trapped. Furthermore, children may not always recognize the danger immediately or have the physical strength to pull away from a drain if they become stuck. The recalled Broqixin covers, measuring approximately 7.36 inches in diameter, create a suction point that does not meet modern safety standards designed specifically to protect these younger, more fragile swimmers.
Elderly individuals and those with physical disabilities or reduced mobility are also at heightened risk. If an older adult or someone with limited strength becomes entangled in a drain due to the defective cover, they may lack the upper body strength required to break free. Similarly, people with heart conditions or other health issues may be less able to withstand the physical stress and panic associated with drowning incidents. The recalled items are sold as generic pool accessories, meaning they are often installed in residential settings where safety inspections are rare. Without the proper VGBA-compliant engineering, these pools become dangerous environments for anyone who cannot easily escape suction entrapment.
It is crucial to understand that this risk applies regardless of swimming skill level. Even strong swimmers can be caught off guard by the sudden and powerful nature of drain suction, particularly in spas where water flow rates are typically higher than in standard pools. The Broqixin covers, identified by the model number 11064W on their packaging, do not offer the necessary protection to mitigate this force. Therefore, the risk is universal for all users of these specific products, but it is most critical for those who are physically unable to resist suction or who may be less aware of the hazard until it is too late.
How to tell if you have the recalled item
Before you panic or rush to take action, it is crucial to be absolutely certain that the pool drain cover installed in your spa or swimming pool is part of this specific recall. Not every white plastic drain cover is unsafe, and not every cover sold online is involved. The Consumer Product Safety Commission (CPSC) has identified a very narrow set of criteria for these dangerous products. To determine if your equipment is at risk, you need to look closely at the physical product itself and check where you purchased it.
The primary suspect in this recall is a pool drain cover manufactured under the brand name Broqixin. This is your first major clue. If your cover does not bear this specific brand name, it is likely not part of this particular safety notice, though you should always verify compliance with local regulations regardless of the brand. Focus your attention on covers that are made of white plastic. The material and color are distinct identifiers here; while other drains may be black or gray, these specific recalled units are distinctly white.
Next, examine the physical dimensions of the cover. The recalled items are circular in shape and measure approximately 7.36 inches in diameter. They are relatively lightweight, weighing about 3.84 ounces. If your drain cover feels significantly heavier or is a different size, it may not be the affected model. Additionally, look at how the cover is attached. The recalled units come with two screws for installation. This two-screw configuration is a key structural detail that helps distinguish these specific covers from other standard pool fixtures.
The most definitive way to identify the recalled item is by looking at the model number printed directly on the product’s packaging or, if you no longer have the box, on the cover itself. You are looking for the text "Model 11064W". This alphanumeric code is stamped or printed clearly on the unit. If you can find this specific model number, combined with the Broqixin branding and the white plastic construction, you have confirmed that your drain cover is part of the recall.
Finally, consider where and how you acquired the product. These recalled drain covers were sold exclusively on Amazon by the seller known as Broqixin. If you purchased a similar-looking cover from a local hardware store, a dedicated pool supply shop, or a different online retailer, it is highly unlikely to be part of this specific recall. However, if you bought it through Amazon from this specific vendor, and the physical characteristics match the description above, you must treat it as a recalled item immediately.
If you are unsure whether your cover matches these exact specifications, do not guess. The stakes are too high to assume safety based on incomplete information. When in doubt, stop using the pool or spa until you can positively identify the drain cover’s make and model against the criteria listed here.
What to do — step by step
If you own a pool or spa with the recalled Broqixin drain covers, your immediate priority is safety. The danger here is not theoretical; these specific covers violate federal entrapment protection standards and pose a serious risk of drowning. Therefore, the first and most critical action you must take is to stop using the affected pool or spa immediately. Do not wait for a replacement part to arrive before taking this step. The risk of suction entrapment exists as long as the recalled cover is installed, so keeping the water running with that specific component in place is dangerous. Consider this a temporary shutdown of the facility until you have secured compliant equipment.
Once you have ensured no one is using the pool, you need to initiate the formal recall process with Broqixin to receive your full refund. The company has outlined a specific procedure for handling these items, which requires you to physically remove the drain cover from the pool or spa. This removal should be done carefully, ensuring that you do not damage the surrounding deck or the plumbing fitting while unscrewing the unit. Remember that each recalled cover comes with two screws, so have the appropriate tools ready to detach it securely.
After removing the cover, you must clearly mark it to prevent anyone else from accidentally reusing it. Take a permanent marker and write the word "Recalled" directly on the surface of the white plastic drain cover. This is a vital safety step because it visually confirms that the item is defective and dangerous, reducing the chance that a family member, pool cleaner, or future owner might ignore the warning and reinstall it. The marking must be permanent to ensure durability against water and weather exposure.
The final administrative step involves documentation and communication with the manufacturer. You are required to take a clear photo of the marked drain cover showing the "Recalled" label. Send this image via email to broqixinrecall@outlook.com. This contact address is the designated channel for this specific recall, identified by model number 11064W on its original packaging. By providing this photo, you verify that you have removed the dangerous component and are participating in the safety protocol. Once they receive your email and photo, Broqixin will process a full refund for the item. Please note that while the recall facts confirm a full refund is available, they do not specify whether shipping labels for return postage will be provided or if you should retain the physical cover as proof of destruction until further notice.
In the interim, before your refund is processed and compliant covers are purchased, ensure that all other pools and spas in your possession have drain covers that meet the Virginia Graeme Baker Pool & Spa Safety Act (VGBA) standards. If you are unsure about your current equipment, consult a professional pool technician to verify compliance. Additionally, use this time to reinforce safety education with children, teaching them strictly to stay away from all drains while the water system is in use.
Your refund, repair, or replacement options
If you have identified the Broqixin pool drain cover in your possession, the first and most important step is to understand that there is no simple fix or local repair option available for this specific item. Because the core issue involves a fundamental violation of federal safety standards—specifically the entrapment protection requirements of the Virginia Graeme Baker Pool & Spa Safety Act—the manufacturer has deemed the product unsafe for any continued use, regardless of its physical condition. This means you will not be offered a replacement part, a repair kit, or a store credit. Instead, the remedy provided by Broqixin is a full financial refund. The goal here is to completely remove the hazard from your property and restore your peace of mind by putting the money back in your pocket, allowing you to purchase a compliant, safer alternative elsewhere.
To initiate this process, you must contact Broqixin directly through their dedicated recall support channel. They have set up a specific email address for this purpose: broqixinrecall@outlook.com. It is crucial that you use only this official email address to ensure your request is tracked correctly and processed without delay. When you write to them, do not expect an automated response system to handle the complexity of your case; this recall involves serious safety implications, so human review is necessary to verify your purchase and coordinate the refund. You should clearly state that you are participating in the recall for the Broqixin pool drain covers (Model 11064W) and request a full refund. While the agency notice does not specify whether you need to provide a receipt or order confirmation from Amazon, it is highly advisable to have your original purchase details ready to share in your email to expedite the verification process.
However, before you simply throw the cover away or mail it back blindly, you must follow a specific protocol that Broqixin requires as part of their remedy. You are instructed to remove the recalled drain cover from your pool immediately. Once removed, you must use a permanent marker to clearly write the word "Recalled" on the face of the white plastic cover. This step is not just administrative; it serves as a critical safety measure to prevent anyone else—such as maintenance staff, family members, or future buyers—from accidentally reinstalling the dangerous item. After marking it, you are required to take a clear photo of the marked cover and send that image to broqixinrecall@outlook.com. This photo acts as proof that you have safely decommissioned the product and are cooperating with the recall process. Only after completing these steps should you await further instructions regarding the finalization of your refund. This rigorous procedure ensures that the recalled items do not re-enter the market, protecting other consumers from the same entrapment and drowning risks associated with this non-compliant product.
What can happen if you ignore it
When you choose to leave a non-compliant pool drain cover in place, you are essentially gambling with a safety mechanism that has been scientifically proven to fail under specific conditions. The core danger here is not merely about getting stuck; it is about the physics of suction and the human body’s vulnerability in water. Pool pumps are designed to move vast amounts of water quickly to keep the pool clean. When that water rushes toward a drain, it creates powerful negative pressure, or suction. If the drain cover does not meet the strict entrapment protection standards of the Virginia Graeme Baker Pool & Spa Safety Act (VGBA), it fails to distribute this force effectively. This means the suction is concentrated into a small area, creating a vacuum effect that can be difficult for even a strong swimmer to overcome.
The most immediate and terrifying consequence of ignoring this recall is physical entrapment. Because the Broqixin model 11064W covers do not provide adequate protection, they cannot prevent hair, skin, or swimwear from being pulled into the drain opening. Once a body part or item becomes lodged, the suction can hold it firmly in place. This is not a situation where you can simply wiggle free. The human body reacts to sudden immersion and pressure changes with panic, leading to rapid exhaustion. Swimmers often find themselves unable to pull away from the drain, trapped by the very water meant to support them.
Beyond entrapment, there is the severe risk of drowning. Even if a person manages to break free, the struggle consumes precious oxygen and energy in an environment where breathing is already difficult. For children, whose bodies are smaller and who may lack the strength or experience to react quickly, the risk is exponentially higher. The recalled covers offer no reliable barrier against hair entanglement, which can lead to head submersion. If a child’s hair is caught in the drain, they may be pulled underwater before an adult even realizes something is wrong. This is why the CPSC emphasizes that these hazards are not theoretical; they are real, documented risks that have led to serious injuries and fatalities in other instances involving non-compliant drains.
Furthermore, ignoring the recall exposes you to legal and liability issues. By continuing to use a product known to violate federal safety standards, you may be considered negligent if an accident occurs on your property. The VGBA was enacted specifically because previous regulations were insufficient to prevent these deadly accidents. Using a cover that does not meet these modern standards means you are operating your pool in violation of federal law, potentially voiding insurance coverage and exposing yourself to significant legal responsibility should someone be injured due to the defective equipment.
Staying safe: broader tips
While the specific recall of Broqixin drain covers highlights a critical regulatory failure, the broader lesson applies to every pool owner in the United States. The Virginia Graeme Baker Pool & Spa Safety Act was enacted precisely because suction entrapment is invisible and instantaneous. To truly protect your family, you must move beyond relying on a single piece of plastic. Start by understanding that modern pools are engineered with multiple layers of defense. This means checking not just for the presence of compliant drain covers, but verifying they bear the proper UL or NSF certification marks indicating they meet current federal safety standards. These covers are designed to break suction; if yours are cracked, loose, or look older than five years, assume their integrity is compromised and replace them immediately with VGBA-compliant units from a reputable manufacturer.
Equally important is the mechanical side of your pool’s filtration system. Many modern pools use Safety Vacuum Release Systems (SVRS) or unblockable drains to mitigate suction power. However, these systems require regular professional inspection. Ask your pool service technician to test the SVRS annually and check that all drain fittings are secure and undamaged. A drain cover is only as good as the pump it connects to; if a pump’s flow rate exceeds what the cover can handle, even a compliant cover may fail under extreme conditions. Therefore, ensure your pool’s plumbing and pump settings are balanced according to the manufacturer’s specifications.
Physical barriers and supervision remain your most reliable lines of defense against drowning. Install four-sided isolation fencing with self-closing, self-latching gates that separate the pool from the house and yard. This simple architectural choice has been proven to reduce drowning incidents by nearly 80% in residential settings. Never rely on a child’s swimming ability as a substitute for active supervision. Designate a "water watcher" who is phone-free and distraction-free whenever children are in or near the water. Teach children that drains are not toys and must be avoided at all times, regardless of how calm the water appears.
Finally, stay vigilant about product safety beyond just pools. Regularly visit Safer.gov to check for recalls on other household items like cribs, heaters, and electronics. Install carbon monoxide detectors near sleeping areas and maintain them with fresh batteries. In every area of home safety, proactive maintenance and educated vigilance are far more effective than reactive measures. By layering mechanical compliance, physical barriers, and active supervision, you create a robust safety net that protects your loved ones from the unpredictable nature of household hazards.