2025 Altec AT Series recalls (5)
5 NHTSA safety recalls cover the 2025 Altec AT Series. Every recall repair is free at any Altec dealer.
Is yours affected? Recalls cover ranges of VINs, not every 2025 Altec AT Series. Check your AT Series by VIN and confirm open recalls at NHTSA.gov.
Every 2025 Altec AT Series recall
Each campaign as NHTSA published it: what is wrong, what can happen, and the fix. Newest first.
Suspension · NHTSA 26V753000
- Problem
- Altec Industries, Inc. (Altec) is recalling certain 2024-2026 AT Series vehicles. The U-bolt securing the rear suspension may not have been properly tightened after rear suspension modification work was completed.
- Risk
- An incorrectly tightened U-bolt may loosen and allow the rear axle to loosen or detach, increasing the risk of a crash.
- Fix
- Altec will instruct owners to inspect the suspension for loose U-bolts. Depending on the inspection results, the U-bolts will be tightened or replaced as necessary. If any damage is found, the suspension will be repaired or replaced at an Altec service center. Repairs will be performed free of charge. Owner notification letters are expected to be mailed January 8, 2027. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3386.
Equipment · NHTSA 26V463000
- Problem
- Altec Industries, Inc. (Altec) is recalling certain 2024-2026 AT Series vehicles. The turntable rotation bearing fasteners may not have been heat treated properly.
- Risk
- A fastener that has not been heat treated could fail, resulting in separation of the pedestal and turntable, increasing the risk of injury.
- Fix
- Altec will instruct owners to inspect the lot number on the fasteners and, if necessary, order a rotation bolt kit to replace the fasteners, or schedule service with Altec, free of charge. Owner notification letters were mailed September 11, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3347.
Power Train · NHTSA 26V386000
- Problem
- Altec industries, Inc. is recalling certain 2014-2026 AT Series Aerial Device vehicles. The transmission park interlock may be missing, allowing the aerial device to operate while the chassis is not in park.
- Risk
- An aerial device that operates while the vehicle is in gear or neutral can cause unexpected vehicle movement and increase the risk of injury.
- Fix
- Altec will update the electrical harness and control modules, free of charge. Owner notification letters were mailed August 7, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3331.
Equipment · NHTSA 26V310000
- Problem
- Altec Industries, Inc. (Altec) is recalling certain 2022-2025 AT Series, 2021-2025 AN Series Aerial Device, 2020-2026 TA Series Aerial Device, 2021 L Series Aerial Device, 2021 LR Series Aerial Device, 2023-2025 AM Series Aerial Device, and 2024-2025 AA Series Aerial Device vehicles. The ground level emergency stop (E-stop) may not stop hydraulic functions of the machine when the machine is in ePTO mode.
- Risk
- Hydraulic functions that do not immediately stop when the ground level E-stop is pressed, increase the risk of injury.
- Fix
- Altec will inspect the units and test to verify the E-stop function. If the wiring is found to be incorrect, it will be updated, free of charge. Owner notification letters were mailed October 12, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3322.
Electrical System · NHTSA 25V400000
- Problem
- Altec Industries, Inc. (Altec) is recalling certain 2020 TA Series, 2019 L Series Aerial Device, 2018-2025 Service Body, LS Series, and AT Series trucks. The Power Distribution Module (PDM 10) circuit may experience a voltage spike, which can damage the Transfer Case Control Module (TCCM) and disrupt chassis functions, including the PTO switch, rearview mirror, or rearview camera.
- Risk
- A damaged TCCM and disrupted chassis functions can result in a loss of handling and control or brake performance, increasing the risk of a crash.
- Fix
- Altec will install a diode to the ignition hot circuit, free of charge. Owner notification letters were mailed August 8, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3229.
2025 Altec AT Series complaints and service bulletins
Altec has issued at least 6 technical service bulletins (repair instructions to dealers) for this model year. Complaints are unverified owner reports; a recall is the manufacturer’s admission of a safety defect.
Service bulletins by component
- Unknown Or Other (5)
- Electrical System (4)
- Service Brakes (2)
- Air Bags (1)
- Engine (1)
- Exterior Lighting (1)
Check your AT Series by VIN
Not every 2025 Altec AT Series is in every recall. Enter your 17-character VIN to see the recalls on record for your exact vehicle, then confirm which are still open at NHTSA.gov or with any Altec dealer.