What was recalled
In July of 2020, Cooper Lighting Solutions initiated a significant safety recall involving a specific range of high-intensity light fixtures designed for public and commercial use. This action was taken by the manufacturer under the oversight of the U.S. Consumer Product Safety Commission (CPSC) to address a potential safety defect that could compromise the structural integrity of the lighting units. The recall is not limited to a single item but encompasses a broad category of products from two distinct series: the All Field series and the Prism RGBA PM series. These fixtures are specialized pieces of equipment, primarily engineered for installation in both indoor and outdoor public sports venues, where they provide the necessary illumination for athletic events and activities.
The scope of this recall is defined by precise model numbers, as not every light fixture produced by Cooper Lighting is affected. Consumers and facility managers need to carefully check the identification sticker located on the back of their specific units against the list below. The recalled All Field series includes models with designations such as AF-XXX, AN-XXX, ST-750, EXP-AF-XXX, PDR-AF-XXX, PDR-EXP-AF-XXX, PDR-AN-XXX, PDR-SD-XXX, and PDR-XXXXX-AF-XXX. Additionally, the Prism RGBA PM series includes models identified as AF-RGBA, PM-RGBA, PR-RGBA, PDRXXXXX-PM-RGBA, and SAM-PM. The "XXX" in these model numbers typically represents specific configuration codes that may vary by installation, so it is crucial to verify the exact alphanumeric code on your unit’s label.
While the official recall alert does not specify the total number of units involved in this action, it is important to note that these fixtures are standard equipment in many sports facilities across the country. They were sold and installed in various locations, with a particular emphasis on public sports venues where large crowds gather. The primary concern driving this recall is the potential for the lenses on these fixtures to loosen or separate from the main body of the light. If you have one of the listed models installed in your home gym, community center, school, or professional arena, it falls under the purview of this safety notice. The manufacturer has identified that these specific configurations pose a risk because the lens assembly may not remain securely attached over time, especially given the vibration and environmental factors common in sports settings.
If you are unsure whether your fixture is part of this recall, the most reliable method is to physically inspect the back of the unit for the manufacturer’s sticker. Cooper Lighting has been proactive in contacting all known purchasers to schedule repairs, but individual facility managers or property owners should still verify their inventory against the model list provided above. This recall highlights the importance of regular maintenance checks on high-hanging electrical equipment, ensuring that all components, particularly lenses and covers, are secure and intact to prevent any potential hazards to people below.
The hazard, explained
At first glance, a high-intensity sports light fixture seems like an immovable part of a stadium’s infrastructure. These are heavy, industrial-grade units designed to withstand decades of use in demanding environments. However, the core issue with this specific recall lies in the connection between the lens—the transparent cover that protects the internal bulbs and electronics—and the main body of the fixture itself. Over time, or potentially due to manufacturing variances, the mechanism holding these lenses in place can fail. The lenses do not simply crack; they loosen and eventually separate completely from the fixture housing.
This is not a minor inconvenience like a flickering bulb. Because these fixtures are typically installed high above the ground in indoor arenas or outdoor stadiums, gravity becomes a dangerous factor. When a lens detaches, it falls as a heavy, rigid object. For anyone standing directly underneath that fixture—whether they are a player on the court, an official reviewing a call, or a spectator in the lower stands—the falling lens presents a direct impact hazard. The sheer weight of the component, combined with the speed gained during its fall, can cause significant blunt force trauma.
The danger is particularly acute in public sports venues where people are often focused on the game rather than their immediate surroundings. A falling piece of hardware from twenty feet up or more leaves very little reaction time to dodge. While Cooper Lighting Solutions has currently received three reports of lenses falling from All Field fixtures at indoor facilities, it is crucial to understand that no injuries have been reported in these specific instances. This is fortunate, but it does not mean the risk is negligible. In a different scenario—perhaps involving a harder floor surface or a person closer to the impact zone—the result could easily have been broken bones, concussions, or other serious physical harm.
Understanding this mechanism highlights why the remedy is so urgent. The hazard is not about electrical shorts or fire risks; it is purely mechanical failure leading to a falling object risk. The lenses are essentially loose components waiting for the right moment (or vibration) to drop. Until Cooper Lighting Solutions repairs the fixtures, the structural integrity of the lens attachment remains compromised. This means that every time the fixture is powered on, or even just by ambient vibrations in the building, there is a non-zero probability that the lens could detach and fall. The only way to eliminate this physical threat is through the free repair service offered, which will secure the lenses firmly back into place.
Who is most at risk
While the Cooper Lighting recall specifically targets professional-grade equipment installed in public sports venues, the people most immediately at risk are those who find themselves directly underneath these fixtures during events or maintenance activities. Because the hazard involves heavy lenses loosening and falling from the ceiling, anyone standing on the court, field, or floor below is vulnerable to blunt force trauma. The primary groups at risk include athletes in motion, spectators seated in lower tiers, and facility staff members who may be working near the installation points.
Athletes are particularly susceptible to injury for several reasons. First, sports often involve dynamic movement where individuals may not look up while tracking a ball or an opponent. A sudden falling object can cause severe head injuries, including concussions or more serious traumatic brain injuries, especially if the victim is unaware of the threat until it strikes. Second, many sports require players to be in close proximity to one another, meaning a single falling lens could injure multiple people at once. The impact force from a detached fixture lens can be significant enough to cause fractures, lacerations, or permanent damage to vision and neurological function.
Spectators and casual visitors also face substantial risk. Unlike athletes who are trained to be aware of their surroundings and may have protective gear, general audiences are often distracted by the game or conversation. They are less likely to anticipate danger from above. Elderly spectators or those with mobility issues are at even greater risk because a fall caused by being struck could lead to secondary injuries such as broken hips or wrists, which carry higher morbidity rates in older adults. Additionally, parents holding young children in their arms near the ceiling area are doubly vulnerable; they may be injured themselves, potentially dropping the child, or the child may be directly hit with little time to react.
Facility maintenance workers and electricians are another high-risk group. These professionals often work close to the fixtures during routine inspections or repairs. If a lens were to detach while someone is inspecting the fixture from below or nearby, the proximity increases the likelihood of direct impact. Furthermore, these workers may be using ladders or scaffolding, which could destabilize if they are startled by a falling object, leading to falls from height in addition to the initial injury hazard.
Children, whether as athletes or spectators, are disproportionately at risk due to their smaller stature and developing bodies. A heavy object that might cause a minor bruise on an adult can result in catastrophic head trauma for a child. Therefore, any area beneath these recalled All Field or Prism RGBA series fixtures should be treated as a danger zone until the free repair is completed.
How to tell if you have the recalled item
Identifying whether your light fixture is part of this recall requires a careful look at two key pieces of information: the brand name and the specific model number. Cooper Lighting, a well-known manufacturer in the lighting industry, produces several series of fixtures that are affected by this safety alert. To determine if your unit is included, you first need to confirm that the fixture bears the Cooper Lighting branding. Once you have established the brand, the next critical step is locating the model number, which acts as the definitive identifier for whether your specific device is subject to the recall.
The most reliable place to find this information is on a sticker affixed directly to the back of the fixture. This label typically contains technical details that are not visible when the light is installed in its normal position. Because these fixtures are often mounted high above playing fields or sports courts, you may need to access the rear panel carefully to read the sticker clearly. If you cannot see a model number, or if the sticker is missing or illegible, it is best to contact Cooper Lighting Solutions directly for assistance rather than guessing.
The recall specifically targets two main product lines: the All Field series and the Prism RGBA PM series. If your fixture is part of the All Field line, look for model numbers that begin with AF, AN, or ST. Common examples include models starting with AF-XXX, AN-XXX, and the specific ST-750 model. Additionally, the recall covers various configurations such as EXP-AF-XXX, PDR-AF-XXX, PDR-EXP-AF-XXX, PDR-AN-XXX, PDR-SD-XXX, and PDR-XXXXX-AF-XXX. The "XXX" in these codes represents variable digits that may differ from unit to unit, so you must check the full alphanumeric string on your sticker.
If your fixture belongs to the Prism RGBA PM series, the model numbers will include references to RGBA or PM. Specific models under this category include AF-RGBA, PM-RGBA, PR-RGBA, PDRXXXXX-PM-RGBA, and SAM-PM. It is important to note that these fixtures are primarily installed in public sports venues, both indoors and outdoors. They are not typical household lamps but rather large-scale lighting units designed for athletic facilities. Therefore, if you are a homeowner checking a standard porch light or indoor ceiling fixture, it is highly unlikely to be part of this recall unless you have recently purchased specialized commercial-grade equipment.
To ensure accuracy, compare every character in the model number on your sticker against the lists provided above. The CPSC and Cooper Lighting have identified these specific codes as hazardous because their lenses can loosen and fall. If your model number matches any of the listed patterns, do not attempt to remove or inspect the lens yourself. Instead, proceed immediately to the remedy steps outlined in this article to schedule a free repair.
What to do — step by step
If you believe you have one of the recalled Cooper Lighting fixtures, the most important thing you can do right now is prioritize safety over convenience. The risk here is real: lenses that loosen and fall can cause serious injury to anyone standing or sitting below them. Therefore, your first and most critical step is to immediately stop using the affected light fixtures entirely. Do not wait for a repair technician to arrive before turning them off; if these lights are installed in a public sports venue, coordinate with facility management to ensure the area is safe and that no one is positioned directly under the fixture while you assess the situation. This immediate cessation of use is your primary defense against the specific hazard identified by the Consumer Product Safety Commission (CPSC). Once you have secured the area by turning off the power, you need to initiate the remedy process. Cooper Lighting Solutions has committed to providing a free repair for all affected units. You should contact them directly to schedule this service. The company is also proactively reaching out to known purchasers to arrange repairs, so keep an eye on your communications. However, if you have not heard from them, do not wait passively. Take the initiative to reach out using one of the following methods: call Cooper Lighting Solutions at 800-954-7228 between 9 a.m. and 5 p.m. ET, Monday through Friday; send an email to AFProgram@cooperlighting.com; or visit www.cooperlighting.com and navigate to the Product Safety Notice section for online support. When you contact them, have your model number ready, as it is located on a sticker affixed to the back of the fixture. Providing this information will help them verify that your specific unit is part of the recall and expedite the repair process. It is important to understand that the remedy for this recall is a free repair, not a refund or replacement with a new model. Cooper Lighting Solutions is responsible for contacting all known purchasers to schedule these repairs, but they rely on you to report your involvement if you haven't been contacted yet. Ensure you document your interaction with them, including dates and reference numbers, in case any follow-up is needed. By following these steps—stopping use immediately, verifying your model number, and contacting the manufacturer for a free repair—you are taking the correct actions to mitigate the risk of injury while resolving the issue efficiently and without cost to you.Your refund, repair, or replacement options
If you own one of the recalled Cooper Lighting fixtures, the good news is that you do not need to worry about the cost of fixing this dangerous defect. The remedy for this recall is straightforward and entirely free: Cooper Lighting Solutions will provide a free repair to all affected units. This means that neither the manufacturer nor your facility will be charged for the labor or parts required to make the light fixture safe again. The company has taken full responsibility for the issue, which allows you to focus on getting the fix scheduled rather than worrying about financial liability. It is important to understand that this is a repair, not a replacement of the entire unit or a cash refund. Cooper Lighting is addressing the specific safety hazard—the loose lenses—by repairing them directly.
You might be wondering how the process works if you are a facility manager or an individual owner who purchased these lights years ago. You do not need to take any immediate action to initiate the repair, although stopping use of the fixture right now is critical for safety. Cooper Lighting Solutions states that they are actively contacting all known purchasers to schedule these repairs themselves. This proactive approach is designed to remove the burden from you. If you are listed in their records, a representative should reach out to you directly to arrange a time for the repair service. However, if you do not hear from them, or if your facility was not captured in their initial notification list, you must take the initiative to contact them.
To ensure your fixture is repaired without delay, you can reach Cooper Lighting Solutions through multiple convenient channels. You may call their dedicated support line at 800-954-7228. Their customer service team is available to assist you from 9 a.m. to 5 p.m. Eastern Time, Monday through Friday. If you prefer written communication or need to send documentation regarding your specific model, you can email them directly at AFProgram@cooperlighting.com. Additionally, for those who prefer to navigate the process online, you can visit www.cooperlighting.com and look for the "Product Safety Notice" section. This page should contain further details and potentially a form or additional contact information specific to this recall program.
When you contact Cooper Lighting, be prepared to provide the model number of your fixture to confirm it is part of this specific recall. As noted in the description, these are primarily installed at public sports venues, both indoors and outdoors. The repair will address the risk of lenses falling off, which has already been linked to three reported incidents where lenses detached from All Field fixtures in indoor facilities. While no injuries were reported in those cases, the potential for harm remains high. By accepting this free repair offer promptly, you ensure that your venue is safe for athletes, spectators, and staff. Do not wait for an official notice if you have identified your model as one of the affected series, such as the ALL FIELD AF, AN, ST, or Prism RGBA PM series models listed in the recall details.
What can happen if you ignore it
It is easy to look at a light fixture hanging from a high ceiling and assume it is simply part of the background scenery—permanent, stable, and unchanging. However, ignoring a safety recall for Cooper Lighting’s All Field, AN, ST, and Prism RGBA series fixtures transforms that assumption into a significant and unnecessary risk. The core danger here is not an electrical fire or a shock hazard, but a mechanical failure with immediate physical consequences. When you continue to use these recalled units, you are leaving a heavy component suspended by a potentially compromised connection point. As the lens loosens and eventually separates from the fixture, it becomes a falling object governed by gravity. The primary consequence of ignoring this warning is the potential for serious physical injury to anyone standing or moving directly beneath the light.
The severity of this risk is amplified by the typical environment where these fixtures are installed. These lights are predominantly found in indoor and outdoor public sports venues, such as gymnasiums, arenas, and community centers. These are not quiet, empty rooms; they are dynamic spaces filled with athletes, spectators, coaches, and staff who may be running, jumping, or focused intently on the game rather than looking up at the ceiling. If a lens detaches while someone is below, the impact can cause fractures, head trauma, or other severe injuries. The fact that Cooper Lighting has already received three reports of lenses falling from All Field fixtures in indoor facilities serves as a stark proof of concept: this is not a theoretical flaw, but an active failure mode that is already occurring.
While no injuries have been reported to date, the absence of current harm does not guarantee future safety. Relying on luck in a high-traffic public venue is a dangerous gamble. Every hour you delay contacting Cooper Lighting Solutions to schedule a free repair increases the window of opportunity for an accident to occur. The "free repair" remedy offered by the manufacturer is designed specifically to eliminate this hazard by securing or replacing the loose lenses. By ignoring the recall, you are essentially choosing to maintain a known defect in a place where people gather to exercise and compete. The real-world consequence is not just a broken light; it is the potential for a preventable tragedy that could affect players, fans, or workers who have no idea that a heavy piece of glass or plastic is dangling precariously above them. Do not wait for the next report of a falling lens to make your decision; act now to ensure the safety of everyone in the venue.