What Mercury Mountaineer owners have reported to NHTSA, the service bulletins the manufacturer sent dealers, and any federal defect investigations, by model year. See Mercury Mountaineer safety recalls or check your VIN.
Complaints owners filed with NHTSA, by the model year of the vehicle. A high count can also mean a popular year, so compare it with how many were sold.
| Year | Complaints | Crashes | Fires | Injured | Deaths | TSBs |
|---|---|---|---|---|---|---|
| 2011 | 0 | 0 | 0 | 0 | 0 | 7 |
| 2010 | 13 | 0 | 0 | 0 | 0 | 20 |
The vehicle systems named most often in Mercury Mountaineer complaints (one complaint can name several).
In the owners’ own words, as filed with NHTSA. Unverified reports; NHTSA removes personal details before publishing.
The contact owns a 2010 Mercury Mountaineer. The contact stated that the check engine warning light was illuminated. The vehicle was taken to an independent mechanic to be diagnosed. The contact was informed that the computer had provided an incorrect error code. The vehicle was also diagnosed by an authorized Ford tech who confirmed the failure with the computer. The manufacturer was contacted and informed of the failure. The manufacturer referred the contact to the NHTSA to file a complaint. The vehicle was not repaired. The approximate failure mileage was 109,000.
TL* THE CONTACT OWNS A 2010 MERCURY MOUNTAINEER. WHILE THE CONTACT'S WIFE WAS DRIVING 70 MPH, SHE DEPRESSED THE BRAKE PEDAL AND THE FRONT DRIVER'S SEAT STARTED TO SLIDE BACKWARDS AND THE INTERIOR LIGHTING ILLUMINATED. THERE WERE NO WARNING INDICATORS ILLUMINATED. THE DRIVER LOST CONTROL OF THE VEHICLE AS IT MADE A 360 DEGREE SPIN. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE DEALER WAS NOT CONTACTED. THE MANUFACTURER WAS INFORMED OF THE FAILURE. THE FAILURE MILEAGE WAS UNKNOWN.
DOORS LOCKING MECHANISM MALFUNCTIONING AND CODING NUMBERS NOT FUNCTIONING. BEING LOCKED OUT WHEN USING CODE #S. CHAIN CRANKIN HARSHLY BUT NOT UNLOCKING DOORS. WHEN USING KEY INSTEAD OF CODE KEY DOES NOT UNLOCK NOR LOCK ANY DOORS EXCEPT DRIVERS DOOR LOCK.
REAR DIFFERENTIAL IS FILLING WITH WATER PASS THE FILL PLUG. THIS IS A GARAGE KEPT CAR AND NEVER OFF ROAD NOR DIRVEN IN DEEP WATER. FIRST TIME DISCOVERED AT 22000 MILES AND THE DEALER REPLACE THE PINION SEAL AND OIL, BUT COULD NOT FIND THE CAUSE. DIFFERENTIAL NOW MAKING NOISE AND AGAIN FULL OF WATER PAST THE FILL PLUG. SEARCHED ONLINE AND FOUND SEVERAL PEOPLE WITH THE SAME PROBLEM WITH FORD PRODUCTS. DEALER CANNOT FIND OR NOT WILLING TO FIND THE CAUSE. CALLED FORD AND THEY OFFER LITTLE TO NO SUPPORT. GUESS THEY ARE WAITING FOR THE DIFFERENTIALS TO LOCK UP AT HIGHWAY SPEED AND KILL A DOZEN OF SO PEOPLE.
AT HIGH SPEEDS, THE CAR STALLS. IT ALSO STALLS AT STOP LIGHTS. THIS HAPPENS REPEATEDLY, AND FORD CANNOT FIGURE OUT WHAT IS WRONG WITH IT.
TL* THE CONTACT OWNS A 2010 MERCURY MOUNTAINEER. THE CONTACT STATED THAT WHILE ATTEMPTING TO LATCH BOTH OF THE SECOND ROW SEAT BELTS, THE BELTS FRACTURED AND DETACHED FROM THE VEHICLE. THE VEHICLE WAS TAKEN TO THE DEALER. THE TECHNICIAN WAS UNABLE TO DETERMINE THE CAUSE OF THE FAILURE. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 60,000.
FRONT BRAKES STARTED AUTOMATICALLY SEIZING UP RANDOM TIMES AND SPEEDS DUE TO A DEFECTIVE WHEEL BEARING THAT DISRUPTED THE ANTILOCK BRAKE SENSORS. THIS CREATED AN EXTREMELY DANGEROUS DRIVING ISSUE. FORD REFUSED TO TAKE RESPONSIBILITY OR PAY FOR ANY REPAIRS BECAUSE IT WAS OUTSIDE THE WARRANTY PERIOD. *TR
SEE BELOW FROM: TIER 1 EMAIL - CRCFMC [MAILTO:CRCFMC@FORD.COM] SENT: THURSDAY, MARCH 20, 2014 8:57 AM TO: [XXX] CT: RE: VEHICLE SERVICE ISSUES CRM:01660000000018 HELLO[XXX] MY NAME IS [XXX], I AM FROM FORD`S CUSTOMER RELATIONSHIP CENTER (CRC). I HAVE REVIEWED YOUR EMAIL REGARDING THE CONCERNS ON YOUR 2010 MOUNTAINEER. I APOLOGIZE FOR ANY INCONVENIENCE THIS HAS CAUSED. FORD MOTOR COMPANY CONSIDERS THE SATISFACTION OF ITS OWNERS TO BE ONE OF ITS MOST IMPORTANT OBJECTIVES. WE COMMIT VERY SUBSTANTIAL RESOURCES AND EFFORT IN A SINCERE ATTEMPT TO RESOLVE THE CONCERNS OF OUR OWNERS. HOWEVER, LIMITS MUST BE PLACED ON THOSE EFFORTS. AFTER CAREFUL CONSIDERATION WE ARE SUPPORTING …
Repair instructions and other communications the manufacturer sent dealers about known issues. A TSB is not a recall, and the repair is usually free only while the car is under warranty; ask your dealer for the bulletin number.
All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership managemen
Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid d
On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop
Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition
Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition
This SKU is a front upper ball joint. The Customer communication requested return of unsold inventory to inspect for ball studs with excessive rotational friction in the ball joint assembly. Excessive friction in the ball joint assembly may cause a perceptible increase in steering effort.
Various vehicles equipped with a 4.6L, 5.4L, 6.8L modular 3 valve engine built on or before 8-Jan-2016 may exhibit symptoms that may include upper end engine noise, rough running, misfire and/or engine damage. If diagnosis leads to only camshaft/camshaft roller follower(s) requiring replacement, replace all of the camshaft roller followers on both banks/cylinder heads with part number 3L3Z-6564-A, not just the faulty roller follower(s). When replacing the camshaft roller followers, refer to Workshop Manual (WSM), Section 303-01.
Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select
2010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The mast
The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The mast
2009-2017 VEHICLES EQUIPPED WITH A 6R80, 6R100, 6R140 AUTOMATIC TRANSMISSION HAVE AN UPDATED MAIN CONTROL VALVE BODY OVERHAUL PROCEDURE. REFER TO WORKSHOP MANUAL (WSM), SECTION 307-01 FOR MAIN CONTROL VALVE BODY (7A100) OVERHAUL PROCEDURES. NOT ALL VALVE BODIES REQUIRE REPLACEMENT. INSPECT THE VALVE BODY BORES, SPRINGS AND VALVES AS DIRECTED DURING DIAGNOSIS AND REPAIR. REFER TO GENERAL SERVICE BULLETIN (GSB) G0000093 AUTOMATIC TRANSMISSION MAIN CONTROL INSPECTION FOR A VIDEO CLIP TO AID IN THE DIAGNOSIS OF THESE REPAIRS.
NHTSA’s Office of Defects Investigation opens these when complaints point to a possible safety defect. Many end in a recall.
On November 18, 2010, NHTSA's Recall Management Division (RMD) opened an audit query (AQ10-001) to investigate recall remedy completion by rental car companies on safety recall campaigns.It was expected to provide the agency an indication of how completely and how quickly rental car fleets perform necessary recall-related remedies on the vehicles owned and then rented/leased for use on the roadways.RMD queried three (3) major motor vehicle manufacturers (Ford, Chrysler, and General Motors) and r
Source: NHTSA Office of Defects Investigation public data (complaints, manufacturer communications, investigations), model years 2010 and later. Had a safety problem? Report it to NHTSA.
In complaints filed with NHTSA for model years 2010–2011, owners most often name: service brakes, vehicle speed control, engine. 13 complaints are on record.
No. A complaint is an unverified report from an owner. A technical service bulletin (TSB) is the manufacturer telling dealers how to fix a known issue; it is not a safety recall and is usually covered only under warranty. A recall is a formal safety action, and its repair is free.
File a vehicle safety complaint at NHTSA.gov. NHTSA reads every report, and patterns of complaints are what open defect investigations and, eventually, recalls.
