What Mercedes-Benz B-Class owners have reported to NHTSA, the service bulletins the manufacturer sent dealers, and any federal defect investigations, by model year. See Mercedes-Benz B-Class safety recalls or check your VIN.
Complaints owners filed with NHTSA, by the model year of the vehicle. A high count can also mean a popular year, so compare it with how many were sold.
| Year | Complaints | Crashes | Fires | Injured | Deaths | TSBs |
|---|---|---|---|---|---|---|
| 2016 | 5 | 0 | 0 | 0 | 0 | 32 |
| 2015 | 25 | 0 | 0 | 0 | 0 | 33 |
| 2014 | 20 | 0 | 0 | 0 | 0 | 31 |
The vehicle systems named most often in Mercedes-Benz B-Class complaints (one complaint can name several).
In the owners’ own words, as filed with NHTSA. Unverified reports; NHTSA removes personal details before publishing.
Drive unit failed. Manufacturer's Faulty coolant seal. Coolant leaked into engine, Dashboard displayed "Workshop" warning about 2-3 times before breakdown.
MERCEDES DEALER NOTES : 07/19/2022 CLIENT STATES STEERING IS STIFF. STARTED ABOUT 1 TO 2 MONTHS AGO AND WOULD SHOW UP ONCE AND AWHILE. WHEN IT WOULD ACT UP WOULD NOT DRIVE IT AND IT WOULD LOCK THE STEERING . THIS HAPPENED MULTIPLE TIMES, WITH ACCIDENT HAZARD. WE DID THE BELOW WORK. ELECTRIC POWER STEERING RACK FAULTY REPLACE COMPLETE ELECTRIC POWER STEERING RACK. WHICH COST US OVER $3000. NOW WE HAVE SIMILIAR PROBLEM STEERING IS TIGHT AGAIN, MAKING FLAPPING NOISE, DEALER RECOMMENDED REPLACEMENT OF POWER STEERING RACK, GEAR BOX 07/02/24 , MERCEDES HAS RECALL ON MANY MODELS DURING YEAR 2015-2018 FOR electric power steering systems, Mercedes says the cars use electric power steering systems …
The contact owns a 2014 Mercedes-Benz B-Class Electric Drive. The contact stated that after stopping at a stop sign, the vehicle lost motive power before the "Malfunction visit workshop" and "Stop switch engine off" messages were displayed. After restarting the vehicle, the vehicle returned to normal functionality; however, the failure recurred more frequently. No warning lights were illuminated. The vehicle was towed to the dealer and diagnosed with an electric drive motor failure. The contact was informed that the electric drive motor needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. After investigating the failure, the contact related i…
The electric motor was leaking coolant and needs to be replaced. I have read countless accounts that this is a known issue with this car.
Occasionally the car will lurch forward when coming to a stop. As you come to a stop it tries to propel the car forward as you are breaking and coming to a stop. Happens rarely but when it does it's a big safety concern.
Failure of seals and or bearings in the electric motor causing coolant to leak into the electric motor, creating an internal electrical fault, seizing electric motor.
Vehicle stopped suddenly and would not restart. Needs a new $17k drive unit and is out of warranty. Drive unit failed due to faulty design where coolant contaminated the electric motor. Vehicle only has 40k miles. The drive unit was built by Tesla for Mercedes. Tesla also built the same unit for Toyota for the electric Rav4. Toyota recalled their units free of charge for customers. Mercedes is aware of this issue and refuses to extend the warranty or recall the roughly 4000 B250E cars that they sold in the USA from 2014-2017.
The main electric drive motor will start leaking coolant which then damages the motor and even electronics. Well known issue and makes the vehicle unsafe and isn't a matter of "if" but "when" the seals will go bad and this is on our car that has less than 40k miles on the odometer.
Repair instructions and other communications the manufacturer sent dealers about known issues. A TSB is not a recall, and the repair is usually free only while the car is under warranty; ask your dealer for the bulletin number.
Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy Check for external damage: You can identify a damaged headlamp in the following way: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latchi
Complaint Headlamp, front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Remedy NOTE: If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 °C/+64.4 °F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. S
Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protrudin
Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer l
Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protrudin
Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for cor
Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 °C/+64.4 °F) and connect the exhaust extraction. Note: Do not perform an
Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 °C/+64.4 °F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave th
Crease formation on genuine leather seat covers in vehicles with low mileage âÃÂâ Objects left on the seats for extended periods of time (pressure marks). âÃÂâ Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). âÃÂâ Light initial creases due to vehicle handling. âÃÂâ Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
The Mercedes me connect services cannot be activated. The remote status data does not update. Error in N112/9 - control unit for telematics services (HERMES). In the HERMES control unit log, under the "URL" tab, the value DEFAULT is stored for "atpServerUrl" and/or "rcsServerUrl". Please carry out a re-commissioning of the control unit N112/9 - Control unit for telematics services (HERMES), which includes both a software update as well as coding. The fault will be rectified by the newly included coding. As a result of the software update to the current software of the control unit N
"MY15+ M278 and M157 Equipped Vehicles with Fault Code ""P023400 â Boost Pressure is Too High"" "
Information Label on Tire Sealant
NHTSA’s Office of Defects Investigation opens these when complaints point to a possible safety defect. Many end in a recall.
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 20
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-spe
Source: NHTSA Office of Defects Investigation public data (complaints, manufacturer communications, investigations), model years 2010 and later. Had a safety problem? Report it to NHTSA.
In complaints filed with NHTSA for model years 2014–2016, owners most often name: power train, engine, electrical system. 50 complaints are on record.
No. A complaint is an unverified report from an owner. A technical service bulletin (TSB) is the manufacturer telling dealers how to fix a known issue; it is not a safety recall and is usually covered only under warranty. A recall is a formal safety action, and its repair is free.
File a vehicle safety complaint at NHTSA.gov. NHTSA reads every report, and patterns of complaints are what open defect investigations and, eventually, recalls.
