What MAZDA CX-3 owners have reported to NHTSA, the service bulletins the manufacturer sent dealers, and any federal defect investigations, by model year. See MAZDA CX-3 safety recalls or check your VIN.
Complaints owners filed with NHTSA, by the model year of the vehicle. A high count can also mean a popular year, so compare it with how many were sold.
| Year | Complaints | Crashes | Fires | Injured | Deaths | TSBs |
|---|---|---|---|---|---|---|
| 2021 | 4 | 0 | 0 | 0 | 0 | 278 |
| 2020 | 1 | 1 | 0 | 1 | 0 | 320 |
| 2019 | 27 | 1 | 0 | 0 | 0 | 449 |
| 2018 | 10 | 1 | 0 | 0 | 0 | 477 |
| 2017 | 21 | 2 | 0 | 0 | 0 | 519 |
| 2016 | 48 | 4 | 0 | 2 | 0 | 658 |
| 2014 | 3 | 0 | 0 | 0 | 0 | 19 |
The vehicle systems named most often in MAZDA CX-3 complaints (one complaint can name several).
In the owners’ own words, as filed with NHTSA. Unverified reports; NHTSA removes personal details before publishing.
Ok so the front seat passenger side i put my phone it think there a person there and it dings constantly until I plug seatbelt it annoying I dont want to hear that all the time madza know about it they won't help unless there a recall
The instrument cluster in my 2021 Mazda CX-3 failed at approximately 50,000 miles. While driving, the vehicle displayed multiple warning lights, including Dynamic Stability Control (DSC), Smart City Brake Support (SCBS), traction control, and front camera/safety system warnings. These safety systems became unavailable due to the instrument cluster failure. An authorized Mazda dealership inspected the vehicle and attempted to reprogram (re-image) the instrument cluster, but the repair was unsuccessful. The dealership confirmed that the instrument cluster had failed internally and must be replaced. The failed component is available for inspection. Mazda Customer Experience has confirmed that…
Fuel injector failed without warning. A lot of fuel leaked into the engine destroying a spark plug in one cylinder and ultimately ruining the catalytic converter when fuel got into it. Independent mechanic and Mazda dealership diagnosed. Car cannot be driven.
Itâs a safety risk with this car. The converter burns super fast, causing issues that seem like itâs related to transmission or alternator.
Windshield wiper fluid tank leaks when you pour fluid in empty within about an hour
While driving on the highway on a posted 65mph, the fuel remaining on the vehicle was posted at 1/4, approx. 75miles remaining. The vehicle abruptly stalled and I managed to pull over on the side of the road. The vehicle then refused to start again. Had to bring it to a fuel station and refueled leading to the vehicle starting again. Dealership diagnosed a bad fuel pump and fuel rail.
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
So the sport mode on cx3 have not bracket under the sport mode and if try to activeit the sport mode whole switch goes down you cant active with grabbing it will fall out of socket
Repair instructions and other communications the manufacturer sent dealers about known issues. A TSB is not a recall, and the repair is usually free only while the car is under warranty; ask your dealer for the bulletin number.
DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Devices plugged into the 12V outlet 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-ce
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. 01-012/22 10/06/22 DESCRIPTION Some vehicles may exhibit accumulation of dried coolant (1) around the water pipe (2). This is caused by a gap between the housing and pipe due to a press fitting during the manufacturing process. The accumulated coolant is solidified and plugs the gap in high temperature environment and the seepage is stopped and does not progress. This is normal and does not require a part replacement, clean off the dried coolant from around the pipe with a wire brush. RE
This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-061/25 12/17/25 DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Devices plugged int
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 09-012/21 12/13/21, 06/10/21 and 04/27/21 DESCRIPTION Some customers may experience all of following symptoms: The door lock/unlock operation will not work using the remote transmitter button. 1. The door lock/unlock operation will not work using the door lock/release touch sensor. 2. The engine will not start using the ignition switch. 3. The transmitter operates by itself. 4. The key battery drains faster than usual. 5. Symptoms 1-3: This may be caused when excess load is applied to the rem
This SA supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. SA-027/26 04/16/26 DESCRIPTION The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Industrial Standard): JIS c
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 01-008/23 06/05/23 Some vehicles may exhibit rattling noises from the engine compartment and oil leakage from the drive belt auto tensioner. This may be caused by insufficient sealing at the drive belt auto tensioner damper when the auto tensioner fully operates under both high ambient temperature and high load conditions. To eliminate this concern, the shape of the drive belt auto tensioner damper has been changed. REPAIR PROCEDURE If the tensioner is found to be "No Good" after completing
DESCRIPTION Some vehicles may require the replacement of a damaged VIN plate or vehicle certification label. To obtain a replacement VIN plate (bulkhead-mounted and visible through the lower-left area of the windshield), contact DAG (Dealer Assistance Group) using VIN Plate Request Form available on One Mazda. To obtain a replacement vehicle certification label (located on the Bôpillar or front door), contact your assigned DSM (District Service Manager) to place the order. If DSM contact information is not available, refer to the Dealer & Field Contact Directory.
This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red. SA-011/24 02/12/24, 06/06/24, 07/29/24 DESCRIPTION Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers. SCHEDULED MAINTENANCE Refer to the ap
This Service Alert supersedes the previously issued M-Tip(s) listed below. The changes are noted in Red text. MT-002/19 09/30/19 and 12/19/19 DESCRIPTION If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely. Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intak
This SA supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. SA-007/25 10/22/25, 06/02/25 and 02/03/25 DESCRIPTION The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Indu
This Service Alert supersedes the previously issued M-Tip(s) listed below. The changes are noted in Red text. MT-003/22 03/02/22 DESCRIPTION Some customers may complain about a tapping or knocking noise coming from the rear seat after fuel fill. The concern will likely occur if the fuel tank is overfilled (more fuel is added after the fuel pump nozzle shuts off automatically) or filled up normally in high ambient temperatures and the fuel expands. No repair is needed. Explain to the customer not to continue filling after nozzle shut off.
This Service Alert supersedes the previously issued SAs and bulletin(s) listed below: The changes are noted below in red. SA-010/23 02/09/23 DESCRIPTION Some customers may experience one or more electrical malfunctions after a vehicle body repair. A newly painted fender stay (2) may be causing a poor front harness (1) ground connection. The front fender stay (2) newly painted surface at ground point (3), where attachment bolt (4) is seated, may create a poor front harness ground connection. NOTE: DO NOT paint ground point (3) attachment bolt (4) is seated. NEWLY INSTALLED FRONT FENDER STAY NOT
Source: NHTSA Office of Defects Investigation public data (complaints, manufacturer communications, investigations), model years 2010 and later. Had a safety problem? Report it to NHTSA.
In complaints filed with NHTSA for model years 2014–2021, owners most often name: electrical system, unknown or other, fuel/propulsion system. 114 complaints are on record.
No. A complaint is an unverified report from an owner. A technical service bulletin (TSB) is the manufacturer telling dealers how to fix a known issue; it is not a safety recall and is usually covered only under warranty. A recall is a formal safety action, and its repair is free.
File a vehicle safety complaint at NHTSA.gov. NHTSA reads every report, and patterns of complaints are what open defect investigations and, eventually, recalls.
