What Ford Crown Victoria owners have reported to NHTSA, the service bulletins the manufacturer sent dealers, and any federal defect investigations, by model year. See Ford Crown Victoria safety recalls or check your VIN.
Complaints owners filed with NHTSA, by the model year of the vehicle. A high count can also mean a popular year, so compare it with how many were sold.
| Year | Complaints | Crashes | Fires | Injured | Deaths | TSBs |
|---|---|---|---|---|---|---|
| 2012 | 0 | 0 | 0 | 0 | 0 | 7 |
| 2011 | 23 | 1 | 0 | 0 | 0 | 21 |
| 2010 | 12 | 3 | 0 | 4 | 0 | 21 |
The vehicle systems named most often in Ford Crown Victoria complaints (one complaint can name several).
In the owners’ own words, as filed with NHTSA. Unverified reports; NHTSA removes personal details before publishing.
I learned of recall on some models of crown victoria police interceptor. I own 3 such vehicles. Two were identified for recall, the third a 2011 however was not. This car has signs of steering issues very hard to turn the wheel at times. There is rust on the lower intermediate steering shaft and at the u joints of the shaft. When I took the other vehicles in for recall servicing I provided the vin # for the 2011 and was informed that there was no recall for it. I am hoping that the recall can be expanded to include this vehicle which is showing some signs of steering shaft issues.
Vehicle is exhibiting stiff steering issues associated with steering column. Mechanic determined steering shaft requires replacement. This vehicle was already involved in a steering column recall several years ago however the problem appears to have returned.
The contact owns a 2010 Ford Crown Victoria. The contact stated while driving at various speeds, excessive force was needed to steer the vehicle as an unknown warning light illuminated on the instrument panel. The contact also stated that the gear oil would leak from the rear passenger side of the vehicle. The contact took the vehicle to an independent mechanic where he had the brake pads and calipers on the rear passengerâs side of the vehicle replaced; however, the failure persisted. The contact called the dealer and was informed that the vehicle was included in NHTSA Campaign Number: 13V385000 (Steering). The contact was informed that parts needed to be ordered to perform the recall rep…
The contact owns a 2011 Ford Crown Victoria. The contact stated while driving 40 mph, the steering wheel started clicking and making an abnormal popping sound. The contact stated that the steering wheel was difficult to maneuver. There was no warning light illuminated. The contact stated he was able to continue to drive the vehicle. The vehicle was taken to the dealer who diagnosed that the intermediate steering shaft needed to be replaced. The manufacturer was made aware of the failure and advised the contact that the VIN was not included in NHTSA Campaign Number: 14V704000 (Steering) or 13V385000 (Steering). The vehicle was not repaired. The approximate failure mileage was 160,000.
TL* THE CONTACT OWNS A 2011 FORD CROWN VICTORIA. THE CONTACT STATED THAT WHILE DRIVING AT SPEEDS ABOVE 60 MPH, THE FRONT END WOULD VIBRATE AND A CLUNKING NOISE WAS PRESENT COMING FROM THE STEERING COLUMN. EVENTUALLY THE STEERING COLUMN WOULD NOT LOCK AFTER PARKING THE VEHICLE. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHO DIAGNOSED THAT THE LOWER STEERING SHAFT BEARING WAS FAULTY. THE VEHICLE WAS NOT REPAIRED. THE LOCAL DEALER RYE FORD LOCATED AT 1151 BOSTON POST RD, RYE, NY 10580 AND THE MANUFACTURER WERE NOTIFIED. THE CONTACT WAS INFORMED THAT THE VEHICLE WAS NOT INCLUDED IN NHTSA CAMPAIGN NUMBER: 13V385000 (STEERING). THE CONTACT STATED THAT THE VEHICLE HAD EXPERIENCED THE SAME FAI…
LOWER REAR WINDOW DEFROSTER TAB DISCONNECTS FROM GLASS, AND DOES NOT STAY PERMANENTLY ATTACHED.
DRIVING OVER 55 MPH WHILE GOING OVER BUMPY HWY OR ON A CURVE THE STEERING WHEEL FEELS SLOPPY AND DROPS DOWN 1-2 INCHES TO THE LEFT OR RIGHT DEPENDING ON THE CURVE. *TR
MY STEERING I SUPER HAD TO TURN THE WHEEL WHEN PARKED AS WELL AS DRIVING. IT IS BECAUSE OF THE STEERING SHAFT IS RUSTED OUT AND VERY DANGEROUS TO DRIVE .I JUST FOUND OUT THAT FORD HAD A RECALL ON THIS ISSUE BUT I NEVER RECEIVED A NOTICE ABOUT IT
Repair instructions and other communications the manufacturer sent dealers about known issues. A TSB is not a recall, and the repair is usually free only while the car is under warranty; ask your dealer for the bulletin number.
Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not
All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership managemen
This SKU is a Radiator Fan. The customer communication requested return of unsold inventory to inspect the electrical connections. An electrical connection issue may lead to the fan not working potentially throwing a check engine light for overheating.
Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid d
For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed an
On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop
Some 2012-2019 Vehicles may require repairs to the Smartlink system. Smartlink is a Ford Licensed Accessory which has a warranty provided by the accessory manufacturer. Warranty replacement parts for Smartlink that are ordered through Ford are not reimbursable through the Ford Motor Company warranty system. Please see the Warranty and Policy Manual for further information on Ford Licensed Accessories.
Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select
The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The mast
The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The mast
REPLACING THE ORIGINAL EQUIPMENT SYNC/NAVIGATION SYSTEM WITH EITHER AN AFTERMARKET SYNC/NAVIGATION KIT OR MODIFYING ORIGINAL SYNC/NAVIGATION PARTS TO PROVIDE ADDITIONAL FEATURES IS NOT RECOMMENDED NOR SUPPORTED ON ANY FORD, MERCURY OR LINCOLN VEHICLE. ONLY APPROVED GENUINE FORD ACCESSORIES OR ORIGINALLY INSTALLED SYSTEMS ARE SUPPORTED AND CERTIFIED TO FUNCTION CORRECTLY WITH OTHER VEHICLE SYSTEMS. IF YOU SUSPECT A SYSTEM HAS BEEN MODIFIED, THE FOLLOWING RESOURCES CAN BE USED TO VERIFY ORIGINAL EQUIPMENT: MONRONEY LABEL (WINDOW STICKER), PROFESSIONAL TECHNICIAN SOCIETY (PTS) OASIS TAB SELECT
The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer
Source: NHTSA Office of Defects Investigation public data (complaints, manufacturer communications, investigations), model years 2010 and later. Had a safety problem? Report it to NHTSA.
In complaints filed with NHTSA for model years 2010–2012, owners most often name: steering, suspension, seats. 35 complaints are on record.
No. A complaint is an unverified report from an owner. A technical service bulletin (TSB) is the manufacturer telling dealers how to fix a known issue; it is not a safety recall and is usually covered only under warranty. A recall is a formal safety action, and its repair is free.
File a vehicle safety complaint at NHTSA.gov. NHTSA reads every report, and patterns of complaints are what open defect investigations and, eventually, recalls.
