What Dodge Viper owners have reported to NHTSA, the service bulletins the manufacturer sent dealers, and any federal defect investigations, by model year. See Dodge Viper safety recalls or check your VIN.
Complaints owners filed with NHTSA, by the model year of the vehicle. A high count can also mean a popular year, so compare it with how many were sold.
| Year | Complaints | Crashes | Fires | Injured | Deaths | TSBs |
|---|---|---|---|---|---|---|
| 2017 | 0 | 0 | 0 | 0 | 0 | 94 |
| 2016 | 0 | 0 | 0 | 0 | 0 | 120 |
| 2015 | 3 | 0 | 0 | 0 | 0 | 146 |
| 2014 | 4 | 0 | 0 | 0 | 0 | 146 |
| 2013 | 4 | 0 | 0 | 0 | 0 | 151 |
| 2010 | 1 | 1 | 0 | 0 | 0 | 24 |
The vehicle systems named most often in Dodge Viper complaints (one complaint can name several).
In the owners’ own words, as filed with NHTSA. Unverified reports; NHTSA removes personal details before publishing.
my drivers door will come open with out touching the door handle, there was a recall on this in 2015, r-14/nhtsa15-178 but because my build date was after February Chrysler did not send me a recall on it will not fix it. this is not safe and they need to fix the problem and let the other viper owners know about this before somebody gets killed! Is there anything you can do to help get this fixed it does not cost that much to fix it but they need to let people know about it.
The contact owns a 2014 Dodge Viper. The contact stated while driving 45 MPH, there was a knocking sound coming from the engine compartment. The vehicle was parked and then towed to a dealer where it was diagnosed that the engine needed to be replaced due to failure of the rod bearing in cylinder #3. The vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was approximately 21,000.
My Viper is displaying the symptoms of your recall 15V-178 (see below) unsafe door release. I called Dodge and they said my vehicle was serviced for this recall in Sept 2015, but cannot produce receipt for the work. The same door lock problems as 15V-178 are now showing up on both of my doors. I would like to know if I have any recourse here? https://chrysler.oemdtc.com/246/safety-recall-r14-nhtsa-15v-178-outside-door-handle-switch-2013-2014-dodge-viper
AS MANY 2013-2015 DODGE VIPER OWNERS REPORT ONLINE, THE HORN TURNS ON AND OFF, STICKING ON FOR LONG PERIODS OF TIME WITH NO CONTACT, RANDOMLY. MOST VIPER OWNER OF THIS YEAR MODEL ARE PULLING THE FUSE SO THE HORN DOES NOT WORK AT ALL. THIS IS A PART OF THE STEERING WHEEL AIRBAG ASSEMBLY THAT IS TIED IN WITH THE HORN MECHANISM. THIS IS A KNOWN PROBLEM WITH THESE VERY EXPENSIVE SIX FIGURE VEHICLES AND SHOULD BE ADDRESSED AS A SAFETY CONCERN BY DODGE IMMEDIATELY AS A RECALL AS THIS IS NEEDED FOR STATE SAFETY INSPECTION.
I WAS DRIVING MY CAR AND SOMETHING LIKE A RUBBER/ELECTRICAL SMELL WAS NOTICED. I LOOKED IN MY REARVIEW MIRROR AND SEEN I HAD SMOKE FILLING THE REAR OF THE CAR. I IMMEDIATELY PULLED OVER. GOT OUT AND OPENED THE REAR LIFT GATE AND AS I LOOKED TO SEE WHAT WAS GOING ON MY REAR LIFT GATE GLASS EXPLODED INTO A MILLION PIECES. IT WAS AS LOUD AS A SHOTGUN GOING OFF. I WAS VERY LUCKY I HAD STOPPED MY CAR AS IT COULD POSSIBLY HAVE CAUSE ME OR SOMEONE DRIVING BEHIND ME TO HAVE AN ACCIDENT IF I HAD BEEN TRAVELING DOWN THE ROAD. THERE WASN'T A PIECE OF GLASS NO BIGGER THAN A DIME LEFT OF THE REAR GLASS. I WAS VERY FORTUNATE THAT I DIDN'T GET CUT OR GLASS IN MY EYES. SHORTLY AFTER IT HAPPENED I RE…
PICKED CAR UP FROM DEALER AFTER ANOTHER SERVICE COMPLAINT AND THE RADIO, PHONE, AND SEAT WERE NOT WORKING. I PULLED THE VEHICLE OVER AND DISCOVERED THE CIRCUIT BREAKER FOR FUSE LOCATION #11(POWER SEAT) HAD A DEAD SHORT AND KEPT THE BREAKER TRIPPED CONSTANTLY. I REMOVED THE BREAKER FROM THE CIRCUIT UNTIL I COULD RETURN FOR REPAIR. UPON RETURN TO THE DEALER, THEY FOUND THAT THE SEAT HARNESS ON THE DRIVERS SIDE HAD BEEN COMPLETED RUBBED THROUGH THE SHEATHING AND WAS SHORTED TO THE SEAT FRAME. *TR
VEHICLE BEGAN HAVING ISSUES AT 10, 500 MILES BY NOT STARTING. PUSH THE START BUTTON ONE TIME AND THE CAR WOULD GO DEAD. IF I LIFTED UP ON THE NEGATIVE BATTERY CABLE, THE CAR WOULD START WITH NO ISSUES. LET GO OF THE CABLE AND THE SAME PROBLEM. WHEN THIS FIRST OCCURRED, I BOUGHT A NEW BATTERY. PROBLEM SEEMED OK. AFTER A FEW DAYS, THE BATTERY LIGHT CAME ON WHILE DRIVING AND THE CAR TURNED OFF WHILE DRIVING CAUSING LOSS OF POWER STEERING AND BRAKE ASSIST. I TOOK THE CAR TO THE DEALER AND THEY SAID IT WAS THE BATTERY TEMP SENSOR AND THAT IT HAD DONE THAT ONCE IN THE DEALERSHIP BEFORE I PURCHASED THE VEHICLE AND THEY THOUGHT THE BATTERY WAS JUST WEAK.. SENSOR WAS REPLACED AND THE VEHICLE …
PASSENGER WINDOW ROLLS ITSELF DOWN AND THE PASSENGER DOOR LATCH ACTUATES AND OPENS THE DOOR. THIS STARTED WITH JUST THE DOOR OPENING WHEN THE CAR WOULD SIT OVERNIGHT. IT THEN LATER PROGRESSED TO ROLLING THE WINDOW DOWN AND OPENING THE DOOR WHILE DRIVING THE VEHICLE. DEALER IS AWARE OF A TECHNICAL SERVICE BULLETIN(TSB) FOR THIS ISSUE REPLACING THE DOOR MODULE, LATCH, AND MICRO-SWITCHES. I AM STILL HAVING TO PAY FOR THE REPAIR BECAUSE THE CAR IS OUT OF WARRANTY, EVEN THOUGH THIS IS A KNOWN SAFETY DEFECT BY THE MANUFACTURER. CAR IS CURRENTLY WITH THE DEALER WAITING ON PARTS FOR THE TSB REPAIR. *TR
Repair instructions and other communications the manufacturer sent dealers about known issues. A TSB is not a recall, and the repair is usually free only while the car is under warranty; ask your dealer for the bulletin number.
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
"Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
NHTSA’s Office of Defects Investigation opens these when complaints point to a possible safety defect. Many end in a recall.
ODI opened PE13-010 on April 26, 2013, to investigate two complaints alleging loss of control crashes caused by rear suspension knuckle failure in model year (MY) 2005 and 2006 Dodge Viper vehicles.The incidents described in the complaints occurred in November and December 2012.Chrysler's response to ODI's Information Request (IR) letter for PE13-010 indicates that the left and right rear knuckles used in MY 2005 and 2006 Dodge Viper vehicles were used in MY 2003 through 2010 Dodge Viper SRT-10
Source: NHTSA Office of Defects Investigation public data (complaints, manufacturer communications, investigations), model years 2010 and later. Had a safety problem? Report it to NHTSA.
In complaints filed with NHTSA for model years 2010–2017, owners most often name: electrical system, structure, air bags. 12 complaints are on record.
No. A complaint is an unverified report from an owner. A technical service bulletin (TSB) is the manufacturer telling dealers how to fix a known issue; it is not a safety recall and is usually covered only under warranty. A recall is a formal safety action, and its repair is free.
File a vehicle safety complaint at NHTSA.gov. NHTSA reads every report, and patterns of complaints are what open defect investigations and, eventually, recalls.
