GE Infrastructure Sensing recalls commercial CO2 and temperature sensors (models T8010, T8011, T5010, T5011, 33ZCT55CO2, 33ZCT56CO2) due to overheating fire hazard. Affected building owners will receive free replacements.
The CO2 and temperature sensors can overheat, posing a fire hazard.
GE Infrastructure Sensing recalls commercial CO2 and temperature sensors that can overheat and cause a fire. Building owners with these sensors should contact GE for instructions on whether to stop using or replace them.
The sensors can overheat, which may lead to a fire hazard. This risk occurs because the sensors are designed for commercial environments where they might be exposed to conditions that cause overheating.
Building owners using GE Telaire Airestat or Carrier Single Beam CO2 and temperature sensors in commercial settings are affected. Those with sensors that have a Telaire, Carrier, or no logo on the front are most at risk.
Check for model numbers T8010, T8011, T5010, T5011, 33ZCT55CO2, or 33ZCT56CO2 on the sensors. The sensors have a Telaire, Carrier, or no logo visible on the front. The model number is not printed on the sensor itself.
Building owners should contact GE Infrastructure Sensing to determine if their sensor is recalled and whether it can be used safely while awaiting a replacement.
Affected building owners will receive a free replacement sensor once GE confirms the sensor is included in the recall.
Building owners should immediately contact GE Infrastructure Sensing for instructions on how to determine if a sensor is included in this recall and if it can be used while awaiting a replacement sensor. Only authorized maintenance personnel should follow these instructions. Building owners with recalled sensors will receive a free replacement sensor.
The recall states that the sensors can overheat and pose a fire hazard, so they should not be used until GE confirms they are safe.
Check for model numbers T8010, T8011, T5010, T5011, 33ZCT55CO2, or 33ZCT56CO2. The sensors have a Telaire, Carrier, or no logo visible on the front.
No, the recall says building owners can keep using the sensor while awaiting a replacement, but they must contact GE to confirm safety.
We’ve drafted a message you can send GE Infrastructure Sensing to request your refund or repair — edit it as you like.
Subject: Recall 140 — GE Infrastructure Sensing GE Telaire Airestat and Carrier Single Beam Carbon Dioxide (CO2) and Temperature Hello, I own a GE Telaire Airestat and Carrier Single Beam Carbon Dioxide (CO2) and Temperature Sensors that is covered by recall 140 from GE Infrastructure Sensing. The official recall notice states: Building owners should immediately contact GE Infrastructure Sensing for instructions on how to determine if a sensor is included in this recall and if it can be used while awaiting a replacement sensor. Only authorized maintenance personnel should follow these instructions. Building owners with recalled sensors will receive a free replacement sensor. I’m writing to arrange the remedy described in the recall (a refund, repair, or replacement as applicable). Could you please tell me the next steps to resolve this? Thank you.
Experiences, tips, and questions from readers. Every comment is reviewed before it appears.
No comments yet — be the first to share your experience.
The facts (hazard, remedy, dates, manufacturer) are pulled from the official CPSC recall record. The plain-language summary and step-by-step checklist are written by GovInfoNow to make the official notice easier to act on — they don’t replace it.
