What was recalled
The U.S. Consumer Product Safety Commission (CPSC) has announced a recall involving specific models of electric pressure washers manufactured and sold under the brand name YERYORK. This action addresses a significant safety concern affecting a limited but distinct batch of consumer equipment. The recall is not global in scope; it targets approximately 300 units of these particular pressure washers that were distributed through online retail channels. Specifically, these items were sold on Amazon by the seller YERYORK. The date of this official recall announcement is August 27, 2026, marking the point at which consumers were formally notified to cease use and take corrective action.
To help you identify whether your equipment falls within this specific recall, it is important to look closely at both the physical characteristics of the device and the labeling details. The recalled products are 2.5 GPM (gallons per minute) electric pressure washers. Visually, these units feature a distinctive color scheme: the body is green with black accents. In terms of dimensions, each unit measures approximately 10.24 inches in depth, 16.14 inches in width, and 12.01 inches in height. These machines typically come packaged with several accessories, including a 500 ml foam cannon, four quick disconnect nozzles, a hose measuring 32.81 feet in length, and four lockable wheels for mobility.
The most critical identifier for this recall is the model number and the presence or absence of specific safety components. You must check the label located on the top of the unit, near the handle. The model number printed on this label should read YE-006. Furthermore, the brand name "YERYORK" is printed at the front of the power washer. It is crucial to note that this recall applies exclusively to pressure washers that lack an integral ground-fault circuit-interrupter (GFCI). If your unit has a GFCI built into the plug or the body, it is not part of this specific recall. However, if you have a YERYORK YE-006 model without a GFCI and with an inadequate-length power cord, it is included in this safety alert.
The scope of this recall is relatively small, affecting only 300 units. This limited quantity suggests that the issue was caught before widespread distribution could lead to a larger volume of affected consumers. However, because the hazard involves electricity and water—a combination that carries severe risks even with small numbers—prompt identification and removal are essential. Consumers who purchased these items directly from YERYORK on Amazon should review their order history and compare it against the physical description provided above to determine if they own a recalled unit.
The hazard, explained
When you use a pressure washer, you are essentially managing two dangerous forces at once: high-pressure water and electricity. Under normal circumstances, these two elements should never meet. However, the specific design flaw in this YERYORK recall creates a scenario where that separation can fail catastrophically. The core issue is not just that the machine is electric, but that it lacks an integral Ground-Fault Circuit-Interrupter (GFCI). To understand why this matters, we first need to look at what a GFCI actually does. A GFCI is a safety device designed to monitor the flow of electrical current. In simple terms, it watches to see if electricity is going where it is supposed to go—in through the hot wire and out through the neutral wire. If even a tiny amount of current "leaks" away from that path—say, through water or a person to the ground—the GFCI detects this imbalance instantly and cuts the power in a fraction of a second.
Because these recalled 2.5 GPM electric pressure washers lack this built-in protection, they rely entirely on standard household circuit breakers or external GFCI outlets to function safely. Standard breakers are designed to prevent fires by stopping excessive current draw, not to protect human life from small leakage currents. If a fault occurs inside the motor or pump of the pressure washer—for instance, if water gets into an electrical connection due to wear, damage, or manufacturing defects—the metal casing or internal components can become energized. Without an integral GFCI, there is no immediate automatic cutoff at the tool itself.
This risk is compounded by another critical flaw: the inadequate length of the power cord. Pressure washers are typically used outdoors on wet surfaces like concrete patios, grass, or dirt. If the power cord is too short, users are often forced to use extension cords or position themselves awkwardly near water sources. This increases the likelihood that the plug, the cord itself, or the connection points will come into contact with standing water or moisture. Water is an excellent conductor of electricity. If a frayed wire, a loose connection, or a faulty component within the pressure washer allows current to escape, and that current finds a path through wet ground to a person, the result can be severe electric shock or electrocution. The absence of the GFCI means that this lethal current can flow continuously until someone manually unplugs the device or a standard breaker trips, which may not happen quickly enough to prevent serious injury or death.
In essence, the hazard is a perfect storm of electrical exposure and environmental conductance. You are using a high-power electric tool in a wet environment, but you have been stripped of the most immediate layer of personal protection (the integral GFCI) and given a cord that encourages unsafe positioning near water sources. This combination significantly raises the probability that a minor electrical fault will escalate into a fatal event before anyone has a chance to react.
Who is most at risk
While the electrical hazards associated with these recalled YERYORK pressure washers pose a serious threat to anyone who uses them, certain individuals and situations are inherently more vulnerable to severe outcomes. The primary group at risk includes homeowners, renters, and hobbyists who use electric pressure washers for seasonal cleaning tasks. Because these units are sold through Amazon and marketed toward general consumers rather than professional industrial users, the typical owner is likely someone without specialized electrical training or safety infrastructure. They often operate these machines in residential settings—such as driveways, patios, decks, and siding exteriors—where the environment may not be optimized for high-voltage electrical equipment.
Children are particularly at risk due to their curiosity and smaller physical stature. Pressure washers are often stored in garages, sheds, or on porches where children might access them. The combination of a powerful water jet and exposed electrical components creates a dual threat. If a child were to interact with the unit while it is plugged in, even inadvertently touching a wet hose or the machine itself, the lack of a ground-fault circuit-interrupter (GFCI) means there is no automatic mechanism to cut the power in the event of a fault. Their smaller body mass also makes them more susceptible to the physiological effects of electric shock, which can cause muscle contractions that prevent them from letting go, thereby prolonging exposure to the current.
Elderly individuals and those with pre-existing heart conditions face heightened risks as well. Electric shock can disrupt the natural electrical signals that control the heart, potentially leading to cardiac arrest or fibrillation. Older adults may have slower reflexes, making it harder to react quickly if they feel a tingle or see water contacting an electrical component. Furthermore, many people use pressure washers to clean hard-to-reach areas, such as second-story siding or high fences, often while standing on ladders or unstable surfaces. If an electrocution event occurs in this context, the secondary risk of falling is significantly increased, compounding the danger beyond the initial electrical hazard.
Additionally, anyone using the pressure washer in damp or wet conditions is at extreme risk. The recalled models lack adequate-length power cords and proper grounding features, which increases the likelihood that the power source will be extended via standard household extension cords running through wet grass or near puddles. Water conducts electricity efficiently, so any fraying of a cord, connection to a wet outlet, or contact between the water stream and the electrical components can create a path for current to travel through the user’s body to the ground. This is especially dangerous for individuals who may be barefoot or wearing minimal footwear while cleaning outdoor surfaces, as this reduces the insulation between their feet and the earth, facilitating the flow of electricity.
Finally, users who are less familiar with electrical safety protocols are at greater risk. The recall highlights that these units do not include an integral GFCI, a critical safety feature designed to detect ground faults and shut off power instantly. Consumers who assume all modern appliances have this built-in protection may not take extra precautions, such as using a portable GFCI adapter or ensuring their home’s electrical system is properly grounded. This gap in knowledge or assumption can lead to complacency, leaving users unprotected against the specific hazards present in these recalled YERYORK models.
How to tell if you have the recalled item
Identifying whether your pressure washer is part of this specific recall requires a careful visual inspection and a check of the labels on the unit itself. Because the hazard stems from missing safety components rather than external appearance alone, you cannot rely solely on color or general shape to confirm if your device is affected. Instead, you need to verify several key physical characteristics and locate specific identification marks that are printed directly on the machine.
First, examine the overall design of the unit. The recalled products are YERYORK-branded electric pressure washers with a distinct green body accented by black components. These units measure approximately 10.24 inches in depth, 16.14 inches in width, and 12.01 inches in height. They typically come equipped with four lockable wheels, a 32.81-foot hose, four quick disconnect nozzles, and a 500 ml foam cannon. However, having these accessories does not guarantee the unit is recalled; the critical factor lies in the electrical safety features.
The most important detail to check is the power cord configuration. The recall specifically targets units that lack an integral Ground-Fault Circuit-Interrupter (GFCI). If your pressure washer has a standard plug without a built-in GFCI button, it may be included in this recall. Additionally, verify the length of the power cord; the recalled items are noted for having an inadequate-length power cord compared to safety standards. If you cannot clearly see or confirm the presence of a GFCI on the cord or the unit’s body, you should assume the risk is present and stop using it immediately.
Next, look for the brand and model identification labels. The YERYORK brand name should be printed prominently at the front of the power washer. To confirm the exact model, locate the label on the top of the unit, near the handle. This label will display the model number YE-006. It is crucial to check this specific location, as other models from the same manufacturer may not be part of this recall. Only the units matching this description—green and black, without a GFCI, with model number YE-006—are subject to this action.
While the recall notice does not specify an exact date range for when these items were sold, it notes that they were sold on Amazon by the seller YERYORK. If you purchased your pressure washer from this source and it matches the physical description above, it is highly likely to be part of the 300 units affected. Always double-check the model number on the label before taking any action, as visual similarities can sometimes lead to confusion between different product lines.
What to do — step by step
If you own a YERYORK pressure washer matching the description above, your immediate priority is safety. The Consumer Product Safety Commission (CPSC) and the manufacturer have identified serious risks of shock and electrocution due to missing safety features. Therefore, you must stop using the recalled product immediately. Do not attempt to use it for cleaning your driveway, patio, or vehicle, regardless of how urgent the task may seem. Continued operation poses a direct threat to your health and life.
Once you have confirmed that your unit is part of this recall by checking the model number (YE-006) and verifying the lack of a Ground-Fault Circuit Interrupter (GFCI), follow these specific steps to process your refund and ensure the item is safely removed from your home:
- Unplug the device. First, disconnect the power washer from any electrical outlet. Ensure the plug is fully withdrawn and that the unit is completely de-energized before proceeding with any physical handling.
- Destruction of the power cord. To prevent anyone else from accidentally using this hazardous unit, you are required to destroy it. Specifically, cut the power cord in half. This action renders the device electrically useless and prevents it from being plugged into an outlet again. This step is critical because the core hazard stems from the electrical connection; without a functional, safe cord, the risk of electrocution is effectively neutralized.
- Document the destruction. Take a clear photograph of the destroyed pressure washer. The image must clearly show the model number label (YE-006) located on the top of the unit near the handle. This photo serves as your proof of compliance with the remedy instructions. Ensure the lighting is adequate and the text on the label is legible in the picture.
- Contact YERYORK for your refund. Reach out to the manufacturer to initiate your full refund. You can do this via email at yeryorkrecalls@outlook.com. Alternatively, you may visit their website at https://yeryork.com/ and click on “Product Recalls” located at the top of the page. Include your photo of the destroyed unit in your communication as requested.
- Dispose of the remains. After you have contacted YERYORK and received confirmation or further instructions, dispose of the destroyed recalled product appropriately. Ensure that the cut wires are safely insulated or covered so that no one can inadvertently reconnect them.
Please note that this remedy involves a full refund and destruction of the unit rather than a repair or replacement. The manufacturer has deemed the design flaws (missing GFCI and inadequate cord length) as fundamental safety issues that cannot be easily remedied in the field. By following these steps, you not only secure your financial compensation but also help keep other consumers safe by ensuring this dangerous equipment does not re-enter the market.
Your refund, repair, or replacement options
If you own one of the recalled YERYORK pressure washers, it is important to understand exactly what your options are and how to proceed with the remedy offered by the manufacturer. In this specific recall, the Consumer Product Safety Commission (CPSC) has documented that the primary remedy provided by YERYORK is a full refund. There is no option listed for repairing the device to make it safe, nor is there an offer for a direct replacement unit from the same model line. This distinction is crucial because safety defects involving electrical shock and electrocution risks are typically addressed by removing the hazardous product from circulation entirely rather than attempting field repairs that might not fully mitigate the danger.
To receive your refund, you must follow a specific set of instructions provided by YERYORK. The process begins immediately with stopping the use of the pressure washer. You should unplug the device from any power source right away to eliminate any ongoing risk of electrical shock while you prepare for the next steps. Once the unit is unplugged, you are required to destroy it before returning any information or waiting for further instructions. Specifically, you must cut the power cord in half. This physical destruction is a mandatory part of the remedy process and serves as proof that the dangerous item can no longer be used by anyone, whether you, your family, or potentially someone who might acquire the unit secondhand.
After destroying the power cord, you need to take a clear photograph of the destroyed pressure washer. This photo must clearly show the model number, which is located on a label on top of the unit near the handle (specifically model YE-006). The image serves as verification for YERYORK that you possess the recalled item and have followed their destruction protocol. You will then send this email to yeryorkrecalls@outlook.com. Along with your photo, you should indicate your request for a full refund.
You can also find more detailed information about this recall by visiting the YERYORK website at https://yeryork.com/ and clicking on “Product Recalls” at the top of the page. While the primary contact method outlined in the recall facts is email, checking their official recall page may provide additional updates or specific forms if they have been updated since the initial announcement on August 27, 2026. It is vital to complete these steps promptly. By destroying the unit and requesting your refund, you ensure that a potentially lethal device is safely removed from your home and prevent it from causing harm to others. Do not attempt to sell, donate, or give away the recalled pressure washer, as doing so would expose others to the serious risk of shock and electrocution inherent in the design flaw.
What can happen if you ignore it
When a recall involves electrical components and water, the stakes are fundamentally different from a defective zipper or a loose screw on a piece of furniture. The YERYORK pressure washers in question present a dual-threat scenario that demands immediate attention: the combination of high-voltage electricity and the conductive nature of water creates a environment where safety margins are incredibly thin. By continuing to use this equipment, you are essentially betting against physics, relying on luck rather than engineering to keep you safe.
The core issue lies in the absence of an integral Ground-Fault Circuit-Interrupter (GFCI). In any appliance that operates near water, a GFCI is not merely a convenience; it is a critical life-saving device. Its sole purpose is to detect even the smallest leakage of electrical current—current that would normally flow safely through the ground wire—and immediately cut power if it senses that electricity is taking an unintended path, such as through a person. Without this specific component built into the unit, there is no automatic fail-safe mechanism to stop the flow of electricity in the event of a fault. If a wire inside the motor frays, if a connection point corrodes, or if moisture penetrates an otherwise sealed compartment, that electrical current has nowhere to go but toward the nearest conductor.
Water is an excellent conductor of electricity, especially when it contains dissolved minerals and salts, which tap water invariably does. When you are using a pressure washer, you are handling a high-pressure spray that creates a fine mist. This mist can travel further than you might expect, settling on the body, your clothes, or the ground around your feet. If the unit lacks adequate grounding protection, a fault could energize the entire chassis of the machine. Because you are likely standing on wet ground and holding a hose or wand that may also be conductive, your body becomes the path of least resistance to the ground. The result is not just a painful jolt; it is a risk of severe electrocution, which can cause cardiac arrest, internal burns, and neurological damage.
Furthermore, the recall notes that these units lack an adequate-length power cord. While this may seem like a minor inconvenience compared to shock hazards, it introduces a secondary layer of danger. Longer extension cords are often required for outdoor work, and using extensions with equipment that already lacks proper internal safety features increases the potential for voltage drop and external damage to the wiring. If an extension cord is damaged, frayed, or improperly rated for the amperage required by the pump, it can overheat, spark, or fail in a way that further compromises your safety.
Although the current report indicates no incidents have been reported yet, silence does not equal safety. Electrical failures are often random and unpredictable; they do not announce their presence until the moment of contact. The fact that 300 units are on the market means there are 300 potential vectors for a catastrophic event waiting to happen. Ignoring this recall is an act of passive risk-taking. You are choosing to maintain a dangerous condition rather than taking ten minutes to follow the simple, free remedy provided by the manufacturer. The consequence of inaction is not just a wasted purchase; it is the preservation of a lethal hazard in your own home.
Staying safe: broader tips
Pressure washers are powerful tools that can transform your home maintenance routine, but they demand a high level of respect for both electrical and mechanical safety. The hazard highlighted in this recall—specifically the lack of proper grounding and adequate cord length—is not unique to one brand or model; it is a common pitfall when users attempt to operate heavy-duty electrical equipment in wet environments. To stay safe with any electric pressure washer, understanding the relationship between water, electricity, and your environment is critical. Water conducts electricity efficiently, which means that even a minor fault in an appliance’s internal wiring can become lethal if the device is not properly grounded or if it is positioned too far from a protected outlet.
One of the most effective ways to mitigate electrocution risk is to use Ground Fault Circuit Interrupter (GFCI) protection. A GFCI outlet, or a GFCI extension cord, monitors the flow of electricity and cuts power instantly if it detects an imbalance that might indicate current is leaking through water or a person. This is not just a recommendation for code compliance; it is a life-saving device. When setting up your pressure washer, always plug it into a GFCI-protected source. If you are using an extension cord, ensure it is rated for outdoor use and has a built-in GFCI, as standard extension cords do not provide this protection. Furthermore, keep the connection point elevated and dry. Never let the plug or the outlet itself come into contact with puddles or running water.
Cord management is equally important. As seen in this recall, inadequate cord length can lead to dangerous stretching, which wears out insulation over time and increases the risk of exposure. Always use a cord that is long enough to reach your work area without tension. If you find yourself constantly straining the cord or moving the pressure washer closer to an outlet than is safe for its design, it may be time to upgrade your home’s outdoor electrical infrastructure rather than compromising on safety. Additionally, regularly inspect your power cords for fraying, cuts, or cracks in the insulation before every use. Damage to the outer sheath can expose live wires, turning a routine cleaning task into a severe hazard.
Finally, proactive maintenance and awareness are your best defenses against product failures. Register your appliances with the manufacturer immediately after purchase so you receive direct notifications if a safety issue is discovered later. You should also periodically check the U.S. Consumer Product Safety Commission (CPSC) website for updates on recalls relevant to the tools you own. By staying informed and adhering to strict electrical safety protocols, you can enjoy the benefits of high-pressure cleaning without compromising your well-being.