Black+Decker Portable Table Saws Made by Rexon Recalled Due to Laceration and Impact Injury Hazards; Sold Exclusively at Walmart

What was recalled

If you have been using a portable table saw for woodworking projects at home or in a small shop, it is important to check whether your specific unit is part of an official safety recall. The U.S. Consumer Product Safety Commission (CPSC) has issued a recall affecting Black+Decker brand 10-inch table saws that were manufactured and sold under the Rexon brand name. This is not a widespread issue with all Black+Decker tools, but rather a specific subset of portable units that presented a structural safety concern. The primary product involved in this recall is the model number JT2504BD. These are 10-inch table saws designed for portability, which means they rely on an integrated stand system to provide stability during operation.

The defining characteristic of these recalled units is their construction and branding details. The table saws themselves sit atop a black metal foldable stand, which was intended to make the tool easy to transport and set up at different job sites. To identify if you own one of the affected models, you should look closely at the front right side of the table saw’s body. Both the "Black+Decker" brand name and the specific model number "JT2504BD" are printed clearly in this location. If you see these markings together on a unit with a black metal foldable stand, it matches the description of the recalled product.

The scope of this recall is defined by where and when these items were available to consumers. These particular table saws were sold exclusively at Walmart stores. They were not distributed through other major hardware retailers or online marketplaces outside of that specific retail partnership. While the exact total number of units shipped worldwide is not specified in the current public record, it is significant enough to warrant a mandatory safety action. Consumers who purchased these tools during the relevant sales period should treat this as an urgent matter.

The recall was officially announced on March 31, 2017. This date marks when the CPSC and Rexon formally notified the public of the defect. It is important to note that even though this recall was issued several years ago, the safety hazard remains active for any owner who has not yet addressed it. If you bought this specific tool at Walmart prior to or around that time, and have kept it in storage or use, it is critical to verify its status immediately. The potential for injury does not disappear with time; in fact, using a structurally compromised tool over a long period increases the risk of an accident.

To summarize, you need to look for a 10-inch Black+Decker table saw, model JT2504BD, sitting on a black foldable stand. If your unit matches this description and was purchased at Walmart, it is part of this recall. The next steps involve stopping use and contacting the manufacturer for a remedy, but first, confirming you have the correct product is essential to avoid unnecessary concern or action.

The hazard, explained

When you are working with power tools, stability is everything. The Black+Decker table saws involved in this recall rely on a specific design element: a black metal foldable stand intended to provide support and portability. Under normal circumstances, this stand should remain rigid when locked into its operational position. However, the core issue identified by the Consumer Product Safety Commission (CPSC) is that this stand can collapse unexpectedly during use. This is not a minor wobble or a temporary instability; it is a structural failure of the support system while the tool is active and potentially under load.

To understand why this is so dangerous, we have to look at what happens when a table saw loses its footing. These tools are designed to cut through dense materials like wood, metal, or composite boards. When you push material against a spinning blade, there is significant resistance. If the stand beneath the saw gives way, the entire machine shifts violently downward or sideways in an instant. This sudden movement disrupts your grip and your balance. Because your hands are likely positioned near the cutting zone to guide the workpiece, this unexpected jolt can cause you to lose control of the material.

The injury potential here is twofold, involving both laceration and impact risks. First, consider the laceration hazard. As the saw collapses, the blade may tilt or drop unpredictably. If your hand slips due to the vibration or shift in position, it can come into contact with the spinning teeth. Even a fraction of a second’s delay in reaction time can result in serious cuts to fingers, palms, or wrists. These are not superficial scrapes; they are deep lacerations that often require medical attention and can impact long-term dexterity.

Second, there is the impact injury hazard. The table saw itself, along with the heavy metal stand, can fall toward your legs or feet. Imagine the weight of a dense power tool dropping from waist height onto your shin or foot. This can cause bone fractures, severe bruising, or crush injuries. Furthermore, if you are standing on a ladder or uneven surface to reach high workpieces, the collapse could throw you off balance entirely, leading to falls that compound the initial injury. The combination of sharp blades and falling heavy machinery creates a perfect storm for accidental harm. This is why the CPSC emphasizes immediate cessation of use: the risk is not just about the tool breaking, but about the sudden, uncontrolled release of kinetic energy that can injure you before you even realize something has gone wrong.

Who is most at risk

While this recall affects a specific model of portable table saw sold exclusively at Walmart, the group most immediately at risk comprises homeowners and DIY enthusiasts who purchased the Black+Decker 10-inch table saw, model JT2504BD. These individuals are typically using the tool for home improvement projects, furniture building, or general carpentry tasks where precision and stability are paramount. Because the product was designed as a portable unit with a foldable stand, it is often moved frequently between job sites, garages, and basements. This mobility, while convenient, introduces a unique layer of risk that stationary saws do not face. The primary danger lies in the mechanical integrity of the black metal foldable stand. If you are one of the owners who has set up this saw on an uneven floor, a slippery surface, or simply failed to fully lock the legs into their extended positions, you are operating under a latent hazard that is not visible during normal inspection.

The specific nature of the hazard—a sudden and unexpected collapse of the stand—means that the risk is not limited to expert craftsmen. In fact, casual users may be at equal or greater risk because they might lack the muscle memory or technical awareness to detect early signs of instability. The hazard involves both laceration and impact injuries. A laceration occurs when the blade, which remains sharp and spinning during operation, comes into contact with skin due to the sudden shift in the saw’s alignment. An impact injury results from the heavy machinery falling onto the operator’s legs or feet. Consequently, anyone standing directly in front of or beside the saw while it is powered on is in the "zone of danger." This includes not only the primary operator but also any assistants holding material or observing the cut.

Vulnerable populations such as elderly individuals or those with limited physical strength may be particularly at risk when attempting to set up or dismantle the foldable stand. The act of unfolding and locking the legs requires a degree of mechanical confidence; if the user is unsure whether the locks are fully engaged, they might proceed to use the saw under the false assumption that it is stable. Furthermore, because the recall notes no reported incidents as of the recall date, we must look to the physics of the failure mode. A collapsing stand removes the operator’s base of support and changes the angle of the blade instantly. There is no time for reaction. Therefore, the most vulnerable users are those who rely on this tool for regular, perhaps even daily, use without realizing that the foundational support system is defective. It is not about skill level; it is about the structural reliability of the equipment you trust with your safety.

Additionally, while children were not explicitly listed as direct users in the incident reports, they are at significant secondary risk if this saw is kept in a home garage or workshop. A heavy, motorized tool that can suddenly drop from a standing position to the floor poses a crushing hazard to small children who might wander into the workspace. The unpredictability of the collapse means that bystanders cannot anticipate the direction or force of the falling equipment. Thus, any household with this specific Black+Decker model must consider not just the operator’s safety, but the safety of anyone else in the vicinity during setup and operation.

How to tell if you have the recalled item

Before you take any action or contact customer service, the most critical step is to confirm whether your specific tool is actually part of this recall. Confusion often arises because Black+Decker produces many different table saws and stands, but this particular safety notice applies only to a very specific set of units. To determine if your equipment is at risk, you need to inspect the physical device with care, looking for exact matches in branding, model designation, and seller history.

First, look closely at the table saw itself. You are specifically searching for a Black+Decker brand 10-inch table saw. This is not a generic or unbranded tool; the "Black+Decker" name should be clearly visible on the unit. More importantly, you must find the model number printed on the front right side of the table saw. The recalled units are exclusively identified by the model number JT2504BD. If your saw has a different model number, even if it looks similar or is from the same brand line, it is not included in this specific recall action. Take a moment to wipe away any dust or debris that might obscure these markings, as clarity here prevents unnecessary anxiety.

Next, examine the stand that supports the saw. The recall specifies that these table saws sit on a black metal foldable stand. If your unit is mounted on a wooden cabinet, a different colored frame, or a non-foldable base, it likely falls outside this particular safety alert. The combination of the Black+Decker 10-inch saw with model number JT2504BD and the specific black metal foldable stand is the key identifier for this batch.

Finally, consider where and when you purchased the item. These recalled table saws were sold exclusively at Walmart. If you bought your saw from a different retailer, such as Home Depot, Lowe’s, or an online marketplace like Amazon or eBay, it is highly probable that your unit is not part of this recall. While it is always wise to double-check the model number regardless of the purchase location, the exclusive sales channel at Walmart serves as a strong initial filter. If you cannot locate the model number or are unsure about the stand’s specifications, do not guess. Instead, contact Rexon directly using the information provided in the remedy section to verify your specific unit’s status.

What to do — step by step

Your refund, repair, or replacement options

If you are one of the owners of the recalled Black+Decker portable table saws, you will be relieved to know that the remedy for this safety issue is straightforward and entirely cost-free. The Consumer Product Safety Commission (CPSC) and Rexon have arranged a specific fix for the defect: they will provide you with a free replacement stand. This is not a partial credit or a store voucher; it is a complete hardware solution designed to resolve the mechanical failure without asking you to spend another dime. Because the core issue lies in the structural integrity of the foldable black metal stand rather than the saw’s motor or blade mechanism, replacing just the stand is the most logical and efficient way to restore your tool to safe working condition.

To initiate this process, you do not need to return the entire table saw to a warehouse or deal with complex shipping logistics for the heavy machine. Instead, your primary point of contact is Rexon directly. You can reach their dedicated recall support team by calling their toll-free number at 866-934-6360. It is important to note their operating hours, as you will want to plan your call accordingly: they are available from 8:30 a.m. to 5 p.m. Eastern Time, Monday through Friday. If calling during those times is difficult for your schedule, or if you prefer to handle the paperwork at your own pace, Rexon also offers an online channel. You can visit their website at www.rexon.net and navigate to the "Safety Information" section to find the details necessary to request your replacement stand.

While initiating the claim, keep in mind that this remedy is specific to the model JT2504BD. The recall facts do not mention a full refund of the purchase price for the entire unit, nor do they offer a repair kit for the existing stand. The path forward is strictly through the replacement of the faulty component. This approach makes sense from an engineering and safety perspective; attempting to patch a collapsing metal frame with tape or additional bolts would never meet the necessary safety standards for a tool that supports heavy weight at high speeds. By sending you a new, reinforced stand, Rexon ensures that the table saw will once again sit securely on a stable base, eliminating the risk of sudden collapse.

When you contact Rexon, have your product ready to provide the model number JT2504BD and the brand name Black+Decker. You may also want to have proof of purchase handy, although the recall information provided does not explicitly state that a receipt is mandatory for receiving the free part. However, having it available can help speed up the verification process. Remember, the goal here is to get you back to your projects safely. By taking the time to call or click through to their safety page, you are ensuring that your tool remains reliable and, most importantly, safe for you and those around you.

What can happen if you ignore it

It is completely understandable why you might hesitate to stop using your Black+Decker table saw. Perhaps you are in the middle of a home renovation project, or maybe this saw has been your trusted companion for years, sitting quietly in your garage until the next weekend DIY task calls your name. The thought of pausing your work to contact Rexon and wait for a replacement part can feel like an unnecessary inconvenience, especially when the tool appears to be functioning normally on the surface. However, ignoring this recall is not merely a matter of administrative delay; it is a decision that directly compromises your physical safety in a way that is both sudden and severe.

The core danger here lies in the structural integrity of the black metal foldable stand. The Consumer Product Safety Commission (CPSC) identified that this specific stand can collapse unexpectedly. This is not a gradual wear-and-tear issue that gives you warning signs over time, such as squeaking hinges or loose bolts that you might tighten up. Instead, the failure is catastrophic and unpredictable. When the stand collapses while the saw is in operation, or even when it is set up but unattended, the consequences are immediate. The primary hazards cited in this recall are laceration and impact injuries. This means that the sudden drop of the heavy table saw unit can cause the blade to shift violently or expose itself in dangerous ways, leading to deep cuts from the spinning blade. Simultaneously, the falling weight of the tool itself poses a significant risk of crushing or bruising your hands, feet, or legs if you are holding onto the unit or standing too close when it gives way.

While the official recall notice for this specific batch of Rexon-manufactured Black+Decker saws indicates that no incidents have been reported to date, the absence of reported injuries does not mean the risk is low. In fact, the potential for injury is high precisely because the failure mechanism is so abrupt. A laceration from a 10-inch table saw blade is rarely a minor scrap; it can result in serious tissue damage, nerve injury, or require extensive medical intervention and suturing. An impact injury from the falling unit can lead to fractures, contusions, or even more severe trauma depending on where the tool lands relative to your body.

If you choose to ignore this recall, you are essentially gambling with your safety every time you power on the machine. You might use it safely ten times, but the eleventh time, the stand could fail without any prior warning. There is no reliable way for a consumer to predict when the metal folds or locking mechanisms will give out. By continuing to use the recalled model JT2504BD, you are exposing yourself to a known, unmitigated hazard that Rexon has acknowledged and is ready to fix for free. The convenience of ignoring the issue is vastly outweighed by the potential for a permanent physical injury that could sideline you for months, far longer than it would take to receive your free replacement stand.

Staying safe: broader tips

Owning power tools like table saws can be incredibly rewarding, allowing you to tackle complex home improvement projects with precision and confidence. However, the line between a successful DIY weekend and a serious injury often comes down to consistent safety habits that go beyond just checking for product recalls. While this specific recall addresses a mechanical failure in the stand of certain Black+Decker models, the broader lesson applies to every woodworking enthusiast: equipment is only as safe as the environment it operates in and the mindset of the user.

First and foremost, always prioritize stability over convenience. In the case of portable table saws, the most common cause of accidents is not blade failure, but rather the unit shifting or tipping during operation. Before you ever plug in your machine, ensure it is on a flat, level surface free of debris or tripping hazards. If your saw comes with legs or a stand, lock them securely and verify that all pins are fully engaged. Think of your workspace as a temporary construction site; just as you would secure scaffolding on a job site, you must treat your portable setup with the same rigor. Never assume a foldable stand is stable simply because it looks upright. Give it a gentle shake test before loading it with wood to ensure it won’t collapse under the vibration of cutting.

Personal protective equipment (PPE) is your last line of defense, not an afterthought. Many serious laceration injuries occur because operators remove safety glasses for a "quick look" or forget to wear hearing protection during long sessions. Always wear ANSI-approved safety glasses that wrap around the sides to prevent chips and dust from entering from peripheral angles. Additionally, avoid loose clothing, jewelry, or long hair that could get caught in moving parts. If you have long hair, tie it back securely; if you wear earrings or necklaces, remove them entirely. The rule of thumb is simple: nothing should be able to bridge the gap between your body and the blade.

Maintaining a clear mental focus is equally critical. Fatigue, distraction, or rushing are silent contributors to workshop accidents. If you are tired or interrupted mid-cut, step away. Do not try to finish a cut if your attention has wandered. Regularly inspect your tools for wear and tear, such as frayed cords, dull blades, or loose guards. A dull blade requires more force to push wood through, increasing the likelihood of kickback—a sudden, violent reaction where the wood is thrown back at the operator. Keep your workspace well-lit and organized, ensuring that scrap wood and offcuts are cleared away immediately after cutting to prevent tripping or accidental contact with the blade.

Finally, make it a habit to stay informed about product safety without waiting for a crisis. Sign up for email alerts from the Consumer Product Safety Commission (CPSC) and check their website periodically. Manufacturers often issue recalls before injuries occur, so acting on these notifications promptly protects not just you, but your family and friends who might use the tool. By combining vigilance with proper technique, you can enjoy the benefits of woodworking while keeping yourself safe.