Product Recall Number: 24-080
Why was Evaporator coil drain pans recalled?
The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posing a fire hazard.
Product Recall Number: 24-080
Product Safety Warning Number:
Date: 2024-01-11
Product Safety Warning Date:
Name Of Product: Evaporator coil drain pans
Description: This recall expansion includes certain units manufactured between January 2019 and February 2020 that were incorrectly marked. DCT recently discovered that a limited number of evaporator coils that were manufactured during that time frame were incorrectly marked with a 2018 serial number, indicating that the unit was manufactured in 2018. The recall scope now includes about 3,600 additional units with the following configurations and coil serial numbers, as shown in the table below:TypeCoil ConfigurationAffected Furnace BrandsAffected Coil Serial NumbersDates SoldCondensing furnace systemUp-Flow(Coil above Furnace) AllPrefixes ranging from 1901 through 2101 and certain prefixes ranging from 1811-1812Jan. 2019 through Nov. 2021 Non-condensing furnace system(Certain configurations) Up-Flow(Coil above Furnace)Any “competitor” brand (excludes Goodman, Daikin or Amana branded furnaces) Prefixes ranging from 1901 through 2101 and certain prefixes ranging from 1811-1812 Jan. 2019 through Nov. 2021NOTE: Furnace systems that were repaired with a new evaporator coil drain pan between January 2019 and November 2021, with the serial number range listed above, are also included in this recall. Whether a non-condensing furnace system falls within the scope of the recall depends on the location of the burners, which, if unknown, can be verified through DCT’s model verification tool at: https://www.recallrtr.com/drainpan.Affected units can be identified through serial numbers found on the evaporator coil or the case, which sits atop the vertically installed furnace. The furnace brand and model number can be found on the furnace on the “Energy Guide” label. Consumers can refer to the instructions on Goodman’s model verification tool at: https://www.recallrtr.com/drainpan.The model number of the outdoor condenser may also be required and can be found on a label attached to the product.
Hazard Description: The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posing a fire hazard.
Consumer Action: None Listed
Original Product Safety Warning Announcement: None Listed
Remedy Type: Repair
Units: About 3,600 additional units (In addition, about 210 were sold in Canada) (298,300 evaporator coil drain pans, and 44,000 in Canada, were previously recalled in November 2021 and in July 2022)
Incidents: DCT has received a total of 31 reports of fire involving the drain pans, including five reports since the recall was reannounced in July 2022. The incidents resulted in one reported smoke inhalation and several reports of significant fire and smoke damage to residences.
Remedy: Consumers should contact Daikin Comfort Technologies Manufacturing L.P. (DCT) to determine whether your unit is included in this recall and to register for the free repair by a qualified technician. DCT is contacting all registered consumers where records indicate their gas furnace system is subject to the recall.
Sold At: Heating and cooling equipment independent dealers nationwide from January 2019 through November 2021 for between $200 and $1,200 per unit. Consumers may have purchased a bundled product including the coil, furnace, installation, and ancillary parts and supplies, or may have purchased the evaporator coil drain pan separately as a replacement product.
Importers: None Listed
Manufacturers: Daikin Comfort Technologies Manufacturing L.P. (f/k/a Goodman Manufacturing Company L.P.) of Houston, Texas (Evaporator Coils)
Distributors: None Listed
Manufactured In: United States
Custom Label: None Listed
Custom Field: None Listed