Product Recall Number: 06-184
Why was Vermont American® Abrasive Cut-Off Wheels recalled?
The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions could result in injury.
Product Recall Number: 06-184
Product Safety Warning Number:
Date: 2006-06-08
Product Safety Warning Date:
Name Of Product: Vermont American® Abrasive Cut-Off Wheels
Description: WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Robert Bosch Tool Corp., Mt. Prospect, Ill., is voluntarily recalling about 400,000 Vermont American Abrasive Cut-Off Wheels. The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury.Name of Product: Vermont American® Abrasive Cut-Off WheelsUnits: About 400,000Manufacturer: Robert Bosch Tool Corp., Mt. Prospect, Ill.Hazard: The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury."! WARNING Read, understand and comply with tool manual before use. Follow OSHA and ANSI B7.1 standards. Use eye, face, dust and ear protection. Wear body apron and gloves. Speed rating of wheel must be greater than tool speed. Do not grind without guard adjusted for maximum operator protection. Mount wheel with the tool flanges provided. Run-in for one minute before application. Do not jam, twist or pinch wheel in work piece or apply excessive side pressure to the wheel. RECOIL may occur if wheel is jammed. Do not use near flammable materials or gases; fire or explosion may result. Do not expose to water, condensation or freezing. Discard wheel if dropped, cracked or chipped."Incidents/Injuries: None reported.Description: The wheels have a black, abrasive exterior; a red circular label on the interior; and are used to clean, slot, nick and cut metal. The wheels were sold under the "Vermont American" brand name had the following catalog numbers, diameters and blade thickness:Item #DiameterBlade Thickness280266-1/2"1/8"280277"-7-1/4"1/8"280288"1/8"2803010"1/8"2803212"1/8"2803314"1/8"Sold at: Industrial distributors nationwide from January 2001 through September 2005 for between $5 and $15.Manufactured In: CanadaRemedy: Consumers with abrasive cut-off wheels that are missing the safety instructions should contact Vermont American Customer Service to obtain safety warning information.Consumer Contact: Call Robert Bosch Tool Corp. at (800) 742-3869 between 7 a.m. and 7 p.m. CT Monday thru Friday.
Hazard Description: The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions could result in injury.
Consumer Action: None Listed
Original Product Safety Warning Announcement: None Listed
Remedy Type: Label, New Instructions
Units: About 400,000
Incidents: None reported.
Remedy: Consumers with abrasive cut-off wheels that are missing the safety instructions should contact Vermont American Customer Service to obtain safety warning information.
Sold At: Industrial distributors nationwide from January 2001 through September 2005 for between $5 and $15.
Importers: None Listed
Manufacturers: Robert Bosch Tool Corp., Mt. Prospect, Ill.
Distributors: None Listed
Manufactured In: Canada
Custom Label: None Listed
Custom Field: None Listed