Skip to content

Product Recall Number: 01-515

Why was Fluke T-2 hand-held electrical voltage and continuity testers recalled?

When the tester "locks-up" it stops working for approximately 8 minutes without warning. Consumers testing electrical sources could fail to be warned of the presence of live current if the tester is not properly operating, posing a risk of shock, electrocution, and thermal burns.

Fluke T-2 hand-held electrical voltage and continuity testers
Here's product recall specific data for Fluke T-2 hand-held electrical voltage and continuity testers.

  • Product Recall Number: 01-515

  • Product Safety Warning Number:

  • Date: 2001-06-18

  • Product Safety Warning Date:

  • Name Of Product: Fluke T-2 hand-held electrical voltage and continuity testers

  • Description: PRODUCT: - Electrical Testers - Fluke Corp., of Everett, Wash., is voluntarily recalling approximately 33,000 model T-2 hand-held electrical voltage and continuity testers. These testers measure 24 to 600 volts alternating current (VAC), and 6 to 220 volts direct current (VDC). "Fluke" and "T2" are written on the front of the unit. The tester body is yellow and black, and measures about 6.25 inches long by 1.75 inches wide and 1.25 inches thick. The wire leads are black and have one black and one red probe. Recalled units have a serial number higher than 73510000. The serial number is located on the back of the unit above the wire leads. Home centers, hardware stores and industrial distributors nationwide sold these testers between June 1999 and March 2001 for about $49.PROBLEM: The recalled units can "lock-up" and stop working. When the tester "locks-up" it stops working for approximately 8 minutes without warning. Consumers testing electrical sources could fail to be warned of the presence of live current if the tester is not properly operating, posing a risk of shock, electrocution, and thermal burns. Fluke conducted two previous recalls in November 1998 and 1999 on T2 Electrical Testers because of different electrical connection problems. Even if consumers had their testers repaired previously (serial numbers below 74165430), their testers could be part of this new recall and the serial number must be checked to determine if it is included in this recall program.INCIDENTS/INJURIES: Fluke has received one report of a tester that "locked-up" and stopped working. No injuries have been reported.WHAT TO DO: Consumers should stop using these voltage and continuity testers immediately, and contact Fluke for information on returning the recalled unit to Fluke for a free repair. Consumers should call Fluke toll-free at (800) 753-8646 between 5 a.m. and 4 p.m. PT Monday through Friday. Consumers can access Fluke's website at www.fluke.com/t2recall. Fluke has sent direct notice to known purchasers.

  • Hazard Description: When the tester "locks-up" it stops working for approximately 8 minutes without warning. Consumers testing electrical sources could fail to be warned of the presence of live current if the tester is not properly operating, posing a risk of shock, electrocution, and thermal burns.

  • Consumer Action: None Listed

  • Original Product Safety Warning Announcement: None Listed

  • Remedy Type: Repair

  • Units: Approximately 33,000

  • Incidents: Fluke has received one report of a tester that "locked-up" and stopped working. No injuries have been reported.

  • Remedy: Consumers should stop using these voltage and continuity testers immediately, and contact Fluke for information on returning the recalled unit to Fluke for a free repair.

  • Sold At: Home centers, hardware stores and industrial distributors nationwide sold these testers between June 1999 and March 2001 for about $49.

  • Importers: None Listed

  • Manufacturers: None Listed

  • Distributors: None Listed

  • Manufactured In: None Listed

  • Custom Label: None Listed

  • Custom Field: None Listed

Back To Product Search